Universal Remote Control SL-8000 Programming Memory Buttons, Example Memory Button Programming

Page 32

Advanced Features

Programming Memory Buttons:

1 Select the section that you wish to program the Memory Button in by pressing the corresponding Device Button (AUD, or SAT) and MUTE button, simultaneously. SET will appear in the LCD.

2 Press one of the Memory Buttons (M1, M2, M3, M4, or POWER) into which you wish to store the functions. M(1-5)_# # will appear in the LCD.

3 Press in up to fifteen commands that you want stored in that Memory button. Each successive button selection will appear as M(1-5)__(01-15)in the LCD.

You can select functions from another mode by first pressing the corresponding Device Button and then the buttons where those functions are located in that mode. The pressing a Device Button also counts as one com- mand.

Note: Each insertion of a Device Button adds a 1/2 second delay to the command sequence.

4 Press the CHANNEL UP button to store your selections. SAVE will flash three times in the LCD to confirm the programming.

Note: It can take up to 15 seconds to send out 15 commands from a memory button. Please continue to point the remote control at the device(s) until all the commands on the Memory Button have been sent out. This will ensure that all the commands are received by the device(s).

Example: Memory Button Programming.

To program Memory Button M2 in the Audio mode to send the following commands: turn on the Audio receiver, turn on the TV, turn on the VCR, and turn on the satellite receiver.

24

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Home Theater Master SL-8000 Operating ManualTable of Contents Introduction Low Battery Message Battery InstallationATo Open and Close the Battery Compartment Cover Using Your Remote Function Table ReferenceFunction Table Button Name Audio Functions SAT Functions TV FunctionsNo. Button Name Button Name Preprogrammed Set Up Three Digit Code MethodUsing Your Remote Auto Search Method Using Your Remote Recalling the Set-Up Code Number Set-Up Code Numbers Audio CableOperation Joining to Device Buttons Setting UpDevice Buttons Appendix AAssignment of Audio/Video EquipmentGlossary Set-Up Code NumberMain Device Mode Automatic Audio ModeAdvanced Features Volume Control Punch ThroughPunch Throughs To Set-UpLCD Warranty SpecificationsTo Return to the Original Setting Channel Control Punch ThroughAdvanced Features Advanced Features LCD Displays in the Automatic Audio Mode Programming a Second TV, VCR, etc. to Other Device ButtonsTransport Control Punch Through To Return to the Original Setting Changing the LCD Display Choice of LCD DisplaysErasing Memory Buttons Memory Buttons Macro Commands Programming Memory Buttons Example Memory Button ProgrammingBacklighting Set-Up Code Tables AUXCable Set-Up Code Tables VCR Manufacturer/Brand Akai Sampo KEC Admiral Satellite Alphastar Audio Jeff Rowland California Audio Mitsumi Set-Up Code Tables DVD Soundstream OEE-0031V Rev
Top Page Image Contents