Universal Remote Control SL-8000 manual Using Your Remote

Page 12

Using Your Remote

If you pass the correct Set-Up Code number, you can return to it by pressing the CHANNEL DOWN button, one Set-Up Code number at a time, until your device turns back on.

Note: During programming, the signal for POWER ON and POWER OFF is located on the MUTE button. For devices that use separate POWER ON and POWER OFF buttons, pressing the MUTE button on the remote control during programming will only turn the device OFF.

4 Once the correct code is confirmed, press the Device Button to store the Set-Up Code number. PASS will appear in the LCD.

5 Test the remote control for your device. Try the POWER, CHANNEL UP AND DOWN, VOLUME UP AND DOWN buttons, etc. If any of the buttons do not perform as they should, please repeat the set-up from Step 1 using the next Set-Up Code number for your device.

Note: Some audio/video devices have separate buttons for POWER ON and POWER OFF. To operate these devices on the remote, press the corresponding DEVICE Button to turn the equipment ON and press the POWER button to turn the equipment OFF.

6 Please repeat the above steps to program the remote control for each of your other devices.

11

Image 12

Contents Home Theater Master SL-8000 Operating ManualTable of Contents Introduction Battery Installation ATo Open and Close the Battery Compartment CoverLow Battery Message Using Your Remote Function Table ReferenceFunction Table Button Name Audio Functions SAT Functions TV FunctionsNo. Button Name Button Name Preprogrammed Set Up Three Digit Code MethodUsing Your Remote Auto Search Method Using Your Remote Recalling the Set-Up Code Number Set-Up Code Numbers Audio CableOperation Setting Up Device ButtonsJoining to Device Buttons Appendix AAssignment of Audio/Video EquipmentGlossary Set-Up Code NumberMain Device Mode Automatic Audio ModeAdvanced Features Volume Control Punch ThroughPunch Throughs To Set-UpLCD Warranty SpecificationsTo Return to the Original Setting Channel Control Punch ThroughAdvanced Features Advanced Features LCD Displays in the Automatic Audio Mode Programming a Second TV, VCR, etc. to Other Device ButtonsTransport Control Punch Through To Return to the Original Setting Changing the LCD Display Choice of LCD DisplaysErasing Memory Buttons Memory Buttons Macro Commands Programming Memory Buttons Example Memory Button ProgrammingBacklighting Set-Up Code Tables AUXCable Set-Up Code Tables VCR Manufacturer/Brand Akai Sampo KEC Admiral Satellite Alphastar Audio Jeff Rowland California Audio Mitsumi Set-Up Code Tables DVD Soundstream OEE-0031V Rev