Universal Remote Control SL-8000 manual Main Device Mode, Automatic Audio Mode

Page 18

Using Your Remote

4Press the ENTER button. SAVE will flash twice and the LCD will return to AUDIO indicating that the joined function has been stored.

Every time that the Device button is pressed it will also emit the joined function.

To erase a joined function from a Device button:

1Press the AUDIO and ENTER buttons simultaneously on the remote control. JOIN will appear in the LCD.

2Press the Device button that you would like to erase a joined function. CLEAR will flash and INPUT will then appear in the LCD.

3Press the ENTER button. The LCD will flash SAVE twice and return to AUDIO indicating that the join has been erased.

Main Device Mode

When the main device is displayed in the LCD, the SL-8000 will perform all of the preprogrammed, joined and punch through features for that device mode.

Automatic Audio Mode

The remote is defaulted to the Automatic Audio. When the remote control is in this mode, pressing a Device button a second time will display A_XXX in the LCD indicating that the Volume and Mute controls of the device programmed into the Audio mode of the SL-8000 is active, while full function control of all other buttons of the current Device mode is maintained.

Main Device Mode

Automatic Audio Mode

15

Image 18

Contents Home Theater Master SL-8000 Operating ManualTable of Contents Introduction Battery Installation ATo Open and Close the Battery Compartment CoverLow Battery Message Using Your Remote Function Table ReferenceFunction Table Button Name Audio Functions SAT Functions TV FunctionsNo. Button Name Button Name Preprogrammed Set Up Three Digit Code MethodUsing Your Remote Auto Search Method Using Your Remote Recalling the Set-Up Code Number Set-Up Code Numbers Audio CableOperation Setting Up Device ButtonsJoining to Device Buttons Appendix AAssignment of Audio/Video EquipmentGlossary Set-Up Code NumberMain Device Mode Automatic Audio ModePunch Throughs Advanced FeaturesVolume Control Punch Through To Set-UpLCD Warranty SpecificationsTo Return to the Original Setting Channel Control Punch ThroughAdvanced Features Advanced Features LCD Displays in the Automatic Audio Mode Programming a Second TV, VCR, etc. to Other Device ButtonsTransport Control Punch Through To Return to the Original Setting Changing the LCD Display Choice of LCD DisplaysErasing Memory Buttons Memory Buttons Macro Commands Programming Memory Buttons Example Memory Button ProgrammingBacklighting Set-Up Code Tables AUXCable Set-Up Code Tables VCR Manufacturer/Brand Akai Sampo KEC Admiral Satellite Alphastar Audio Jeff Rowland California Audio Mitsumi Set-Up Code Tables DVD Soundstream OEE-0031V Rev