Advanced Features
To Return to the Original Setting:
1 Select the mode that you want to turn off the Volume Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE button simultaneously. SET will appear in the LCD.
3 Press the VOLUME UP button. PUNCH will appear in the LCD.
4 Press the Device Button again. The DEVICE Mode will flash in the LCD.
The AUDIO or TV Volume Control “Punch Through” is now turned off. The VOLUME and MUTE of the original device will operate on the remote control.
Channel Control “Punch Through”
You can program the remote so that either the SAT or Cable Channel Controls (CHANNEL UP and DOWN) will also operate in other modes on the remote control.
Example: Change CHANNELS UP and DOWN on your cable box while the remote is in the TV mode.
Note: When this feature is active, SAT or Cable CHANNEL UP and DOWN will override any existing channel controls in that mode.
To Set-Up:
1 Select the mode that you wish to program for Channel Control “Punch Through.”
2 Press the corresponding Device Button and the MUTE button simultaneously. SET will appear in the LCD.
3 Press the VOLUME DOWN button. PUNCH will appear in the LCD.
18