Universal Remote Control MRF-300/RFX150 installation manual Click on the cell for the first

Page 13
Flasher Column

MRF-300 BASE STATION

Click on the “cell” for the first

Signal Column

identical TV, by crossing the

 

device row with the Signals col-

 

umn.

 

TV1 Device Row

 

Select RF from the three options shown for EACH of the identical TV’s.You may leave the other components of the system set to IR & RF.

Step 7 - Adjust the Flashers For Each of the Identical Devices The RF Setup window enables you to adjust which Flashers output by the remote control for each device individually, by clicking on the intersection of a row and a column and then selecting 1-6 from the seven options shown in the pull down list box.

Click on the “cell” for the first identical TV, by crossing the device row with the Flashers column.

TV1 Device Row

Select the correct Flasher (refer to your connection notes) for EACH of the identical TV’s.You may leave the other components of the system set to ALL.

Step 8 - Apply, Save, Download and Test

First click on the OK button of the RF Setup window. Next, Save your work. Finally, download to your remote. When you select TV1 with your remote, com- mands are only sent to it. Likewise for the rest of your identical TV’s!

Page 10

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Installation Manual Page Table of Contents Introduction Interference Rejection and Adjustable RF Range via RFX-150 Features and BenefitsParts Guide IR Input for Keypads or IR Repeater SystemsInstallation Connect the RFX-150 to the RF IN, but do not Mount IT Daisy Chain Multiple MRF-300’s to One RFX-150 RF SensorMount the RFX-150 and adjust for Optimum Range Connect the Power Supply to the MRF-300Test RF Address Adjust IR Line Output LevelsFront Blaster Overload Open the RF Setup WindowDisabling the Front Blaster Step by Step via PC Controlling An Array of Identical Components or Zones Program One Device With IR commandsIdentical Components/Zones Step by Step via PC Copy The Programmed Device Adjust the Signal For Each of the Identical DevicesPaste The Programmed Device Click on the cell for the first Reveal the Receiver settings Open the RF Setup Window in MX EditorProgramming For Multiple Equipment Locations Add, Name and Assign Receiver ID#Warranty Frequently Asked QuestionsSpecifications How can I increase the range of the remote control?Complete ControlTM
Top Page Image Contents