Programming For Multiple Equipment Locations
You can operate up to 15 different equipment locations, each with an MRF- 300 assigned a unique Receiver ID#. You program each of your remotes to talk to the equipment locations you want by assigning each of your devices to a receiver. First, you must add and name your receivers for the locations they are placed in:
Step 1 - Open the RF Setup Window in MX Editor
The RF Setup window opens after selecting RF Control from the Program Menu.
Step 2 - Reveal the Receiver settings
Extend the RF Setup window by clicking on the
Receivers button of the RF setup window.
Step 3 - Add, Name and Assign Receiver ID#
Using the controls at the bottom extended portion of the RF Control win- dow, add new receivers and rename them for the
Assign the correct Receiver ID# for each LOCATION by clicking on the desired CELL and selecting the ID# you want from the pull down list. Each LOCATION should have a unique ID#. It is ok to install multiple
You may rename the Default receiver to something more descriptive by clicking on the Rename button.
Add new receivers by clicking on the Add button.
Delete receivers by selecting them first by clicking on their Name, then clicking the Delete button.
Step 4 - Save and Download to your remote.
Page 11