DVR User’s Manual
IP Dome Protocol
If the connected device is an IP Dome Camera, then select an appropriate IP Dome Protocol from the provided options.
3.5.3Device Setup
Enter <Device Setup> to configure the basic settings of the IP camera. The basic settings include the IP camera’s product name, image quality, image adjustment, etc. Set the item <Apply> to <Yes> to apply the changes.
NOTE: The <Device Setup> menu may have fewer or more menu items according to different IP camera models.
3.5.4Activated
Access this item and select <Yes> to activate the connection to the IP camera. To deactivate the connection, select <No>.
NOTE: Once the connection to the IP camera is activated, menu items <Hostname/IP>, <Model>, and <Connection Setup> will be grayed out and cannot be accessed.
3.5.5Status
After the connection to the IP camera is activated, users can check the connection status. The menu will be shown as below.
|
| Status |
1. | Model | **** |
2. | Streaming Format | MPEG4 |
3. | Resolution | 640x480 |
4. PPS | 10 | |
5. | Bandwidth | 20 KB/Sec |
6. | Pkg. lost rate | 0.1% |
The information shown on the monitor is “read only”.
23
