Premium Home Creations H.264 user manual Intercom Function, UPnP Function

DVR User’s Manual

4.6Intercom Function

Intercom function enables the DVR site to communicate with the camera site. This function will be available when the optional Audio Out connectors are installed and the audio output devices are connected.

To initiate communication, press and hold any channel key for 2 seconds. When the communication starts, below message will be shown on the screen:

INTERCOM

YOU ARE NOW COMMUNICATING WITH CHANNEL

02

At this time, users will be able to hear audio from the camera site, even if the audio output setting is disabled in the OSD setup menu. To start speaking to the camera site, press and hold the DOME key. Once the DOME key is released, the audio from the camera site will be heard again.

To terminate intercom, press the same channel key or press ESC.

NOTE: Intercom function is not available for channel 1.

4.7UPnP Function

UPnP is the abbreviation for Universal Plug and Play, which is a relatively new technology that integrates a universal protocol for widespread plug-and-play devices to ease the network implementation. When a PC and a DVR both installed the UPnP function, the PC can automatically recognize the DVR in the same local area network.

The advantage of this function is that PCs can connect to the DVR via the remote control software by directly clicking on the icon representing the DVR in <My Network Places> folder.

49