DVR User’s Manual
The ID number must match the ID address set by the dome. The Unit ID is in the range of 1 to 255. Note that there cannot be any two devices on the same bus given the same ID address, or a conflict may occur.
NOTE: The settings become effective after saving the changes and exiting from the menu.
4.5.4Dome Controlling Key
The functions of some keys in dome control mode are totally different from normal status function. Please refer to Setup Guide for the graphical illustration of functional keys.
Set / Go Preset
This key is used to enter the Dome Preset menu to set up certain position as a preset and go to the predetermined preset positions for viewing.
Toggle Hint Screen
This function is used to avoid viewing the dome parameter information while controlling dome camera. Press this key to hide the screen. Press it again to redisplay the screen.
Iris Open
Use to open the Iris on the dome camera.
Focus Near
Use to focus the dome camera near.
Zoom In
Use to zoom in the dome camera. This function enables the user to enlarge a certain area.
ESC
Use to leave dome control mode and return to live and full screen viewing mode.
Auto / Enter
•In OSD setup mode, the key is used to make selection.
•In dome control mode, this key is used to activate automatic focus and iris function.
46
