Universal Remote Control manual Customizing Your RF10 with, Special Advanced Features

17					18
YCustomizingour RF10 with AdvancedSpecialFeatures	Customizing Your RF10 with				CustomizingYourRF10with SpecialAdvancedFeatures
	Customizing Component Names on the LCD Screen
	Special Advanced Features
	After you’ve finished all your basic setup, you can choose
	to make operation easier by customizing the RF10 just the
	way you want, using the Special Advanced Setup Features
	described in this section.
	You can easily edit or change the name of any of the eight
	COMPONENT buttons on the LCD screen. For example, you
	can rename AUX to “LIGHTS” or SAT to “DISH”, etc.
	Here’s how:
	STEP 1:	STEP 2:	STEP 3:	STEP 4:
	Press and hold both the	The current COMPONENT name	Once the character you want	When you are finished editing
	COMPONENT button you want	will then appear on the screen,	appears, move to the next space	the COMPONENT name, press
	to rename and the MENU	with the first space/character	by pressing the Right ( ) cursor	the COMPONENT button you
	button at the same time for	blinking on and off. Change the	button. Use the Left ( ) cursor	pressed in STEP 1 to save the
	approximately 3 seconds, until	character by using any of the	button to move the blinking	changes. The RF10 will respond
	the word “EDIT” is displayed on	NUMBER buttons. Each press	character to the left. Use the	by flashing “SAVED” twice, then
	the LCD screen. This signals	of the same NUMBER button	Down ( ) cursor button to	automatically return to normal
	that you are now in EDIT mode.	selects the next character of	delete the currently blinking	operating mode.
SETUPADVANCED		that number’s group, as shown	character.		ADVANCEDSETUP
		in the diagram below:
	IMPORTANT:You now have 30 seconds
	to perform the next step while you are
	in EDIT mode. If you don’t press a
	button within 30 seconds, EDIT will
	disappear from the screen, signaling
	that you have exited EDIT mode and
	you will need to start over.