31
Erasing Commands
Erasing All Learned Commands in ALL Components | Erasing Macro Commands |
32
Erasing Commands
COMMANDS
STEP 1:
Press and hold both the POWER ON and the STOP buttons for 10 seconds, until the display flashes ERASE ten times
STEP 2:
Release the buttons and the display will flash SAVED twice and the RF10 will automatically return to normal operating mode
POWER ON
BUTTON
STOP
BUTTON
STEP 1:
Press and hold one of the MACRO buttons (ON, OFF or one of the 8 COMPONENT buttons) and the MUTE button, until the word “MACRO” is displayed on the LCD screen.
IMPORTANT: You now have 30 seconds to perform the next step while you are in MACRO mode. If you don’t press a button within 30 seconds, MACRO will disappear from the screen, signaling that you have exited erase mode and you will need to start over.
STEP 2:
Press the CHANNEL (
) UP button to save. The display will flash CLEAR and then SAVED two times.
ERASING
ERASING
MACRO
BUTTONS