Universal Remote Control M2056-C manual Programming a Learned Key

•Learning capacity is approximately 16 to 25 keys, depending on the code being learned.

•Certain device functions are not learnable including multi-frequency types, some high frequency ones, and other unusual formats.

•For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights.

NOTE: Please have your original remote controls handy before programming learning.

Programming a Learned Key

NOTE: If more than 10 seconds pass between key presses, the remote exits programming.

1.Press and hold SETUP until the last-selected SETUP mode key blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead, either your batteries are low, or the Titan Remote Control has a memory fault.

2.Press a mode key once (i.e., AUX, DVD, AUD,

TV, or STB) to assign a mode for learning.

3.Place the Titan Remote Control head-to-head (about 2" apart) from your original remote control.

2"

4.Press the key on your Titan remote control that is supposed to learn the new code. The mode LED begins blinking rapidly. On the original remote, press and hold the key to be learned. Continue holding the key on the original remote until the Titan Remote Control’s LED blinks twice.

NOTE: If the LED on the Titan remote displays one long blink, a learning error has occurred. Try

repeating this step again until a successful capture occurs. If the function is still not captured, press and hold SETUP to exit pro- gramming and review the “Learning Precau-

www.urcsupport.com

12