![](/images/new-backgrounds/1215124/21512439x1.webp)
Using the Master Power Key
1.Press STB once.
2.Press POWER. The remote sends a power
command to each device that was included in
the Master Power Macro.
Clearing the Master Power Key
1.
2.
SETUP
3.
4.
5.
SETUP
On the remote control, press STB once.
Press and hold SETUP until the mode LED blinks twice.
Enter 9 9 5. The mode LED blinks twice.
Press POWER once.
Press and hold SETUP until the mode LED blinks twice.
www.urcsupport.com
20