Universal Remote Control M2056-C manual Deleting a Single Learning Key, TV, or STB

www.urcsupport.com

13

presses, the remote exits programming.

If more than 10 seconds pass between key

tions” on the previous page. If needed, also see “Troubleshooting” on page 23. After review, start programming again at step 1.

5.Repeat steps 2 through 4 for another mode

SETUP and/or key or press and hold SETUP to exit

programming.

Deleting a Single Learning Key

This process returns the key to its original programming for the mode you select. You can also delete learned programming by teaching a different function to the key (see “Programming a Learned Key” on page 12)

NOTE: If more than 10 seconds pass between key presses, the remote exits programming.

1.Press and hold SETUP until the last-selected SETUP mode key blinks twice, then press 9 7 6.

2.Press a mode key once (i.e., AUX, DVD, AUD,

TV, or STB).

3.Press the key containing the learned function to be deleted twice. The mode LED blinks once.

4.Repeat steps 2 through 3 for another key or SETUP press and hold SETUP to exit programming.

Deleting All Learned Keys in a Specific Mode NOTE:

1.Press and hold SETUP until the last-selected SETUP mode key blinks twice, then press 9 7 6.

2.Press a mode key twice (i.e., AUX, DVD, AUD, TV, or STB) to clear all the learned keys for that mode. The LED blinks twice.

3.Repeat step 2 through 3 for another mode

SETUP and/or key or press and hold SETUP to exit

programming.