Programming a Macro Key
1.On the remote control, press and hold SETUP
SETUP until the mode LED blinks twice.
2.Enter 9 9 5. The mode LED blinks twice.
3.Select a macro key (for example, F1) and press it once. The mode LED blinks once.
4.Press the key sequence you want to program into the macro. For example, to turn on your TV and raise its volume, press TV, POWER,
VOL+, VOL+, VOL+....
NOTE: You can program up to 15 key presses into one macro.
5.Press and hold SETUP until it blinks twice.
SETUP Now the macro is saved to the assigned macro
key.
6.To add another macro, repeat steps 1 through 5 for the other macro key and the new key sequence that you wish to assign to that macro key.
NOTE: Programming more than five macros on the same macro key overwrites previous settings.
Clearing a Macro Key
1.On the remote control, press and hold SETUP
SETUP until it blinks twice.
2.Enter 9 9 5. The mode LED blinks twice.
3.Press the macro key you want to clear once.
4.Press and hold SETUP until the mode LED SETUP blinks twice.
This macro key is now clear and ready for reprogramming (see “Programming a Macro Key” on
www.urcsupport.com
18