PROGRAMMING VOLUME LOCK
Volume Lock allows you to set your remote to direct all volume commands to whichever home theater device you designate as your audio source. By default, Global (All) Volume Lock is set to TV, so you can control TV volume while in any mode on your remote. You can also perform Volume Lock on a selected device or set of devices to set Volume Lock to function on some modes, but not on others.
Locking All Volume Control to a Single Device
To change the Global Volume Lock setting from TV (default) to another device, follow these steps:
1.Press and hold SETUP until the mode LED
SETUP blinks twice.
2.Enter 9 9 3. The mode LED blinks twice.
3.Press VOL+ once. The mode LED blinks once.
4.Press the mode key for the device that you wish volume functions to control. The mode LED blinks twice.
Now pressing VOL+,
Locking Volume Controls for Specific Device Modes To set Volume Lock to occur for some device modes, but not others, you must first follow the steps under “Unlocking All Volume Locks” on page 15. Then proceed to the steps below:
1.Press the mode key for the device that you wish volume functions to control.
2.On the remote control, press and hold SETUP SETUP until the
3.Enter 9 9 3. The mode key LED blinks twice.
www.urcsupport.com
14