Toshiba 51H94 owner manual Contents

Page 5

Important Safety Precautions for Split Cabinet Feature

(Model 57H94 only)

Toshiba TV model 57H94 has a split cabinet feature that allows disassembly of the cabinet into two sections during installation.

For details, please refer to the insert titled ÒDisassembly/ Reassembly Instructions for Split Cabinet FeatureÓ that accompanied this ownerÕs manual in the accessory pack. If you do not have the insert, you can download a copy of it from our Web site (www.toshiba.com/tacp in the U.S.A.). If you do not have access to the Internet, call 1-800-631-3811 to have a copy of the insert mailed to you.

WARNING: If you split the cabinet for any purpose, NEVER energize the bottom section until it is completely and properly installed. Energizing the disassembled bottom section and

subjecting it to intentional misuse (for example, exposing it to a foreign object) creates the potential for an electrical shock hazard that could result in death or serious injury.

CAUTION: If you use the split cabinet feature, ALWAYS handle and treat the top section of the TV cabinet, which contains a glass mirror, with great care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

Installation, Care, and Service

CAUTION: The split cabinet feature allows disassembly of the cabinet into two sections during installation. If you use the split cabinet feature, follow these precautions while the two sections of the TV cabinet are disassembled:

1)Always handle and treat the top section of the TV cabinet (with the viewing screen), which contains a glass mirror, with great

care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

2)Never temporarily locate the disassembled bottom section in an area where it may be exposed to foreign objects or abuse (for example, areas where children may be playing, where items may fall on top of the unit, or where liquids may spill into the unit). Failure to follow this instruction may result in damage to the optic components of the TV. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

3)Always keep the top and bottom sections of the TV cabinet in an upright position while disassembled. Failure to follow this instruction may result in damage to the TV, including but not limited to the optic components, cabinet, bezel, and glass mirror.

SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

4)WARNING: Never energize the bottom section of the TV cabinet while disassembled. Failure to follow this instruction could result in death or serious injury.

5)Never place anything on top of the bottom section of the TV cabinet. Failure to follow this instruction may result in damage to the optic components. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

6)Never store or transport the unit while it is disassembled. Failure to follow this instruction may result in damage to the TV, including but not limited to the optic components, cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

Contents

 

Important Safety Information

2-5

Chapter 1: Introduction

7

Welcome to Toshiba

7

Features of your new TV

7

Overview of steps for installing, setting up, and

 

using your new TV

8

Chapter 2: Connecting your TV

9

TV front panel controls and connections

9

TV back panel connections

10

Overview of cable types

11

About the connection illustrations

12

Connecting a digital CableCARD

12

Connecting a VCR and antenna or Cable TV

 

(no Cable box)

13

Connecting a camcorder

13

Connecting a VCR and Cable box

14

Connecting a VCR and satellite receiver

15

Connecting a DVD player with S-video, a VCR,

 

and a Cable box

16

Connecting a DVD player with ColorStream®

 

(component video) and a VCR

17

Connecting two VCRs

18

Connecting an HDMIor a DVI device to the

 

HDMI input

19

Connecting a digital audio system

20

Connecting an analog audio system

20

Controlling infrared remote-controlled devices

 

through the TV (IR pass-through)

21

Connecting IEEE-1394 video devices

22

G-LINKconnection

25

Chapter 3: Using the remote control

26

Learning about the remote control

26

Installing the remote control batteries

27

Using the remote control MODE button to control

 

your other devices

27

Remote Control functional key chart

28

Programming the remote control to operate

 

your other devices

30

Multi-brand remote control device codes

32

Chapter 4: Menu layout and navigation

34

Main menu layout

34

Setup/Installation menu layout

35

Navigating the menu system

35

(Continued on next page)

 

 

 

Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.

5

 

 

 

H94(E)005-06(Split&TOC)

5

8/3/04, 8:10 AM

 

(E) 51/57H94

Image 5
Contents 51H94 57H94 It Makes a Difference Where Your TV Stands Safety PrecautionsIssue Tune Into SafetyInstallation, Care, and Service Important Safety InstructionsTwo blades and a third grounding Prong. The wide blade or the thirdOr continuous, unplug the power cord When the unit is being turned on orContact a Toshiba Authorized Service Center Hours to allow the condensation to evaporateContents 100 Using the TV Guide On Screen Interactive program guideWelcome to Toshiba Features of your new TVIntroduction See LED indications on Or remote controlPower Ñ Press to turn the TV on and off Connecting your TVTV front panel controls and connections 6 7 8For an explanation of cable types, see TV back panel connectionsTo a Personal Computer PC Overview of cable typesAbout the connection illustrations Connecting a digital CableCARDFor more information, call your local Cable operator You will needConnecting a camcorder Connecting a VCR and antenna or Cable TV no Cable boxTo use the TV Guide On Screen recording features To view the VCROn Screen recording features Connecting a VCR and Cable boxTo view basic and premium Cable channels From Cable TVVideo connections or to record satellite programs Connecting a VCR and satellite receiverTo view satellite programs using the standard To view VCR To view premium Cable channelsTo view the DVD player To record a TV program while watching a DVD Two coaxial cables Two sets of standard A/V cablesTo view antenna or Cable channels To dub or edit from VCR 1 to VCR Connecting two VCRsTo view the antenna or Cable signal ¥ one Hdmi cable type a connector Connecting an Hdmi or a DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needConnecting an analog audio system Connecting a digital audio systemOne optical audio cable To control the audioTheaterNet on-screen device control IEEE-1394 devices usingTo connect the IR blaster cable This sensor is marked on some devicesSupported signals Connecting IEEE-1394 video devicesIEEE-1394 device initialization When you connect a D-VHS or A/V HD device to the TVTo edit the IEEE-1394 device information IEEE-1394 device managementSee Chapter LINKconnectionTo connect to the G-LINK jack 51/57/65H94 Using the remote controlLearning about the remote control Device mode control after programming Installing the remote control batteriesTo install the remote control batteries Power Remote Control functional key chartAudio VCR Mute Press Mode to select the TV mode to control the TV Device code setupPress Mode to select the mode you want to set up Searching and sampling the code of a deviceOperational feature reset Using the volume lock featureRepeatedly press Mode to select CABLE/SAT mode To reset the volume controls to the original device modeCable boxes Multi-brand remote control device codesVCRs/PVRs Receivers CD playersLaser disks DVD playersMain menu layout Menu layout and navigationSetup / Installation menu layout To set up the TV Guide On Screen system TV Guide On Screen system setupScreen 3 Do you have Cable service connected? Screen 4 Do you have a Cable box connected?On next Setting up the TV Guide On Screen systemH94E036-395-TVGsetup 04, 402 PM TV Guide On Screen Reminder Selecting the menu language Configuring the antenna input Setting up your TVTo configure the ANT 1 and ANT 2 input sources To select the menu languageTo program channels automatically Programming channels into the TV’s channel memoryProgramming channels automatically Manually adding and deleting channels in the channel memory To add and delete channels in the Favorite Channels lists Programming your favorite channelsTo add the channel to the Favorite Channels set To clear your favorite channel listsSetting up TheaterNet Setting up and using TheaterNet on-screen device controlTo set up TheaterNet device control To remove a device from TheaterNetTo view another source To select the device’s control icons directlyTo close the on-screen control icons Amplifiers TheaterNet IR device codesLaser disk players Miscellaneous audio devicesVCRs Video accessory Hdtv decoder ReceiversSTS Manually adjusting the color Adjusting the color convergenceAutomatically adjusting the color Convergence using TouchFocusSetting the Hdmi audio mode Setting the Avhd device skip timeTo reset your convergence adjustments To select the Hdmi audio modeViewing the CableCARD menu Setting the time and dateTo set the time and date To view the CableCARD menuViewing the system status Viewing the digital signal meterTo open the TV Guide On Screen system TV Guide On Screen system includes the following featuresBelow Rating, stereo, HDTV, new episodeNavigating the TV Guide On Screen system TV Guide On Screen remote control functionsTo lock/unlock the Video Window Video WindowPanel Menus ¥ Show is presented in high-definition TV, if available Info BoxTV Guide On Screen Icons Listings screen TV Guide On Screen ServicesExample Category search Search screenTo edit or delete a keyword List of all matching shows for that keyword is displayedTo choose the way recordings are displayed Recordings screenTo view a recording, you can do one of the following Screen a Screen BSchedule screen Record featuresSet a show to Record from a panel menu Recording notification banner Manually set a show to RecordManually set a show Reminder Remind featuresSet a show Reminder from a panel menu Reminder notification banner Change channel display Setup screenChange system settings General default options Change default optionsRecord defaults Remind defaultsSelecting the video input source to view Using the TV’s featuresTo select the video input source to view Channel yzTo clear the input labels Labeling the video input sourcesTo label the video input sources Tuning to the next programmed channel Tuning channelsSwitching between two channels using Channel Return Switching between two channels using SurfLockTo select the picture size Press PIC Size on the remote controlSelecting the picture size TheaterWide 1 picture size For 43 format program ¥ None of the picture is hiddenTheaterWide 2 picture size for letter box programs Full picture size for 169 480i, 480p source programs onlyTo set the scroll settings Using the auto aspect ratio featureTo turn on the Auto Aspect feature To turn off the Auto Aspect featureTo set the Cinema Mode to Film Selecting the display format 480i and 480p signals onlyTo set the Cinema Mode to Video To select the display formatUsing the POP double-window feature Using the POP featuresTo display a program in the POP window To close the POP windowTo close the still POP window Switching the speaker audio main or POPFreezing the main picture in the POP double-window POP double-window aspect ratio Using the favorite channel scan featureTo scan and tune your favorite channels FAV ScanSelecting the picture mode Adjusting the pictureAdjusting the picture quality Resetting the picture settingsUsing CableClear DNR digital noise reduction Using the Night Mode featureTo select the color temperature Selecting the color temperatureResetting the advanced picture settings Advanced closed captions Using the closed caption modeDigital closed captions Digital audio selector Adjusting the audioMuting the sound Selecting stereo/SAP broadcastsResetting your audio adjustments Adjusting the audio qualityUsing the StableSound feature Selecting the optical audio output format Using the SRS WOW surround sound featureTurning off the built-in speakers Memory card specifications Using the memory card picture viewerDuring the slide show Viewing digital photos on your TVTo set the slide show interval To close the picture viewerMemory card care and handling Using the memory card pictureSetting the ON/OFF timer Displaying TV setting information on-screen Setting the sleep timerUnderstanding the auto power off feature Understanding the last mode memory featureEntering the PIN code Using the Locks menuIf you cannot remember your PIN code Changing your PIN codeTo block and unblock TV programs and movies Blocking TV programs and movies by rating V-ChipPress z to highlight Edit Rating Limits and press Edit Rating Limits screen below appearsLocking video inputs Blocking channelsUnlocking programs temporarily Using the front panel lock feature Using the GameTimerTroubleshooting Restore Factory Defaults procedure as described on Set to SAP modeClosed caption problems Caption featurePower cord is plugged Green lights solid TV Guide On Screen FAQsContact a Toshiba Authorized Service Center LED indicationsSetup How do I resize or close the Info window? What do the frequencies for Record and Remind mean? OperationsAppendix SpecificationsLimited United States Warranty For 32 and Larger TVs Limited Canada Warranty101 Channel programming Index12Ð25 3Ð5Remote control Picture adjustmentsPicture-out-picture POP 2Ð504-11 R1 Toshiba America Consumer PRODUCTS, L.L.C