Toshiba 51H94 Using the TV’s features, Selecting the video input source to view, Channel yz

8 Using the TV’s features

Selecting the video input source to view

To select the video input source to view:

1.Press INPUT on the remote control or TV/VIDEO on the TV front panel.

2.Press 0Ð7 to select the input source you want to view, depending on which input jacks you used for connecting your devices (see Chapter 2).

The current signal source displays in the top right corner of the INPUT SELECTION screen.

Note:

•While the Input Selection screen is open, you also can use the yz buttons on the remote control (or the Channel yz buttons on the front panel) to change the input.

•While the Input Selection screen is not open, you can repeatedly press the INPUT button on the remote control or the TV/VIDEO button on the TV front panel to change the input.

•To select an IEEE-1394 input source, press the TheaterNet DEVICE button on the remote control (see page 44).

•If an IEEE-1394 device is the current input, it will appear at the bottom of the Input Selection list; however, it will be removed from the list if the input source is changed.

•You can label the video input sources according to the specific devices you have connected to the TV (see next page).

•The source can be “hidden.” See page 68 for details.

•If you use the TV’s remote control to start recording, you will not be able to change inputs during recording.

If you use a device other than the TV’s remote control to start recording and then change inputs, the recorded audio and video may be affected.

Numbers

+10

–	INPUT
ACTION 100
MENU

y

ENTER

z

CHANNEL yz

TV/VIDEO

TV front panel

MENU VOLUME CHANNEL EXIT TV/VIDEO TouchFocus

		Copyright © 2004 TOSHIBA CORPORATION. All rights reserved.	67
H94(E)067-76(8a-UseTV)	67	8/3/04, 6:08 PM

(E) 51/57H94