HM66_EN.book Page 34 Thursday, February 23, 2006 2:49 PM
Chapter 5: Using the TV’s basic features
Using the StableSound® feature
The StableSound® feature limits the highest volume level to prevent extreme changes in volume when the signal source changes (for example, to prevent the sudden increase in volume that often happens when a TV program switches to a commercial).
To turn on the StableSound® feature:
1 Press Yand open the Audio menu.
2 Highlight Audio Settings and press T.
3 In the StableSound field, select On.
Audio Settings
Bass100
Treble100
Balance0
StableSoundOn
ResetDone
4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.
Note: The RESET function returns your audio adjustments to the following factory settings:
Bass . . . . . . . . . center (50)
Treble. . . . . . . . center (50)
Balance . . . . . . center (0)
StableSound. . . Off
To turn off the StableSound feature:
Select Off in step 3 above.
Turning off the built-in speakers
You can use this feature to turn off the TV speakers when you connect an audio system to your TV (- “Connecting a digital audio system” and “Connecting an analog audio system” in the Installation Guide).
To turn off the built-in speakers:
1 Press Yand open the Audio menu.
2 Highlight Audio Setup and press T.
3 In the Speakers field, select Off.
Audio Setup
MTS |
| Stereo | ||
|
|
| ||
Language |
| English | ||
|
| |||
Speakers | Off | |||
|
| |||
Optical Output Format |
| Dolby Digital | ||
|
|
|
|
|
| Reset |
| Done |
|
|
|
|
|
|
4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.
To turn on the
Select On in step 3 above.
Selecting the optical audio output format
You can use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV
(- “Connecting a digital audio system” in the Installation Guide).
To select the optical audio output format:
1 Press Yand open the Audio menu.
2 Highlight Audio Setup and press T.
3 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device.
Audio Setup
MTS |
| Stereo | ||
|
|
| ||
Language |
| English | ||
|
| |||
Speakers |
| On | ||
|
| |||
Optical Output Format | Dolby Digital | |||
|
|
|
|
|
| Reset |
| Done |
|
|
|
|
|
|
4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.
34
HM66 (E/F) Web 213:276