Toshiba 56HM66 Selecting the color temperature, Selecting the lamp mode, To select the lamp mode

Press Yand open the Video menu.

Highlight Advanced Picture Settings and press T.

HM66_EN.book Page 42 Thursday, February 23, 2006 2:49 PM

Chapter 6: Using the TV’s advanced features

Selecting the color temperature

You can change the quality of the picture by selecting from three preset color temperatures (cool, medium, and warm), as described below.

Mode Picture Quality

cool blueish

medium neutral

warm reddish

To select the color temperature:

1

2

3 In the Color Temperature field, select the mode you prefer (Cool, Medium, or Warm).

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Lamp Mode		Low Power
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: If you select one of the factory-set picture modes (Sports, Standard, or Movie) and then change the color temperature mode, the picture mode automatically changes to Preference in the Picture Settings menu.

Selecting the lamp mode

You can select either the High Bright or Low Power lamp mode.

•The High Bright mode is useful when additional picture brightness is desired (such as in a bright room).

To select the lamp mode:

1 Press Yand open the Video menu.

2 Highlight Advanced Picture Settings and press T.

Video

Picture Settings

Advanced Picture Settings

Theater Settings

Navigate ENTER Select CH RTN Back EXIT Exit

3 In the Lamp Mode field, select High Bright or Low Power, whichever you prefer.

Advanced Picture Settings				ANT 1
	Dynamic Contrast		On
	CableClear		Auto
	MPEG Noise Reduction		Low
	Color Temperature		Cool
	Lamp Mode		Low Power
	Game Mode		Off
		Reset	Done

4 To save the new settings, highlight Done and press T. To revert to the factory defaults, highlight Reset and press T.

Note: If you set the lamp mode to Low Power, each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time. You may notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction.

42

HM66 (E/F) Web 213:276