Toshiba 53AX62 Changing channels, Setting up your TV, Adding and erasing channels manually

Setting up your TV

Adding and erasing channels manually

After you have automatically programmed channels into the TVÕs memory (see page 25), you can manually add or erase individual channels.

To manually add or erase channels:

1.Select the channel you want to add or erase. If you are adding a channel, you must use the Channel Number buttons to select the channel.

2.Press MENU, and then press x or • until the SET UP menu appears.

3.Press y or z to highlight ADD/ERASE.

SET UP
LANGUAGE	ENGL I SH
CLOCK SET
ANT 1 / 2	ANT 1
TV / CABLE	CABLE
CH PROGRAM
ADD / ERASE	ADD / ERASE

4.Press x or • to select ADD or ERASE, whichever function you want to perform.

5.Repeat steps 1Ð4 for other channels you want to add or erase.

Changing channels

To change to the next programmed channel:

Press Channel yz on the TV or remote control.

To change to a specific programmed channel:

Press and hold Channel yz for about one second. The TV will enter the channel surf mode.

		Upper channels
		↑
1 6	T B S
1 3	E S P N	Current channel
1 1	F O X
7	C B S
4	C N N	↓

Lower channels

Channel label (if set)

Repeatedly press or hold Channel y or z while the channel surf mode is on-screen to scroll the channel list. Release the button to display the highlighted channel.

To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0Ð9 and 100).

For channels 100 and higher, press the 100 button, and then the next two numbers. For example, to select channel 125, press 100, 2, 5.

Channel

Numbers

MENU

yzx •

Channel yz

26