Toshiba 53AX62 owner manual Troubleshooting, VIDEO1, VIDEO2, VIDEO3

Page 53

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.

Problem

 

Solution

TV will not turn on

 

•

Make sure the power cord is plugged in, and then press POWER.

 

 

•

The remote control batteries may be dead. Replace the batteries.

No picture, no sound

 

•

Check the antenna/cable connections.

 

 

• Press INPUT on the remote control (or TV/VIDEO on the TV) to

 

 

 

check the main picture source.

No sound, picture OK

 

• The sound may be muted. Press VOLUME.

 

 

•

The station may have broadcast difficulties. Try another channel.

 

 

• Make sure the SPEAKERS function in the AUDIO menu is set

 

 

 

correctly.

Poor sound, picture OK

 

• The station may have broadcast difficulties. Try another channel.

Poor picture, sound OK

 

•

Check the antenna connections.

 

 

•

The station may have broadcast difficulties. Try another channel.

 

 

• Adjust the PICTURE menu.

Poor reception of broadcast channels

 

•

The station may have broadcast difficulties. Try another channel.

 

 

•

Check the antenna connections.

 

 

•

If you are using a VCR, make sure the TV/VCR button is set

 

 

 

correctly.

Cannot receive above channel 13

 

•

Make sure the TV/CABLE switch is set to the mode that

 

 

 

corresponds with the signal source (cable company or antenna).

A black box appears on-screen

 

• The closed caption feature may be set to one of the Text modes (T1,

 

 

 

T2, T3, or T4). Set closed captioning to OFF.

Cannot select a certain channel

 

• The channel may be locked out with the CH LOCK feature, or

 

 

 

erased with the ADD/ERASE feature.

Multiple images

 

•

The station may have broadcast difficulties. Try another channel.

 

 

•

Antenna reception may be poor. Use a highly directional outdoor

 

 

 

antenna.

Poor color or no color

 

•

The station may have broadcast difficulties. Try another channel.

 

 

• Adjust the TINT and/or COLOR in the PICTURE menu.

 

 

• The picture may suffer from color shading (caused by changing the

 

 

 

direction of the TV when it is on). Turn off the TV and allow it to

 

 

 

cool for 30 minutes.

No stereo or SAP sound from a

 

•

Make sure the MTS feature is set properly.

known MTS broadcast

 

 

 

The remote control does not operate

 

•

Make sure the appropriate device mode is selected.

 

 

• There may be an obstruction between the remote control and the

 

 

 

remote control sensor. Remove the obstruction and retry the remote

 

 

 

control.

 

 

•

The remote control batteries may be dead. Replace the batteries.

Cannot access signal input sources

 

• The VIDEO LOCK feature may be on. Set it to OFF.

(VIDEO1, VIDEO2, VIDEO3,

 

 

 

ColorStream) and/or channels 3 and 4

 

 

 

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

 

 

Usingthe

RemoteControl

 

 

 

 

Settingup

yourTV

 

 

 

 

UsingtheTV’s

Features

 

 

 

 

Appendix

 

 

 

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents 53AX62 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Introduction Welcome to ToshibaExploring your new TV Connecting a VCR Connecting your TVConnecting a cable converter box and a VCR Connecting a cable converter boxYour You will need Three coaxial cablesIntroduction Connecting YourTV Control Connecting a DVD player/satellite receiver and a VCRUsing Remote Settingup YourTV TheTV’s Features UsingConnecting two VCRs Connecting a DVD player with ColorStream component FromConnecting your TV Video and a VCRConnecting an audio system Connecting a camcorderDolby Pro Logic* surround sound system Connection example Connecting an A/V receiverUsingtheTVÕs Features Appendix Preparing the remote control for useInstalling the remote control batteries Remote control functional key chart Using the Remote ControlDisc AM/FM Recall Device code setupSearching and sampling the code of a device Verifying the device code Using the Volume Lock featureOperational feature reset Device code table Cable box setup codesVCR setup codes DVD setup codes CD Player setup codes Amplifier setup codes Learning about the remote control Learning about the menu system Introduction Connecting YourTVSelecting the antenna input Changing the on-screen display languageUp TV Press x or to highlight your desired languagePress y or z to select CH Program Adding channels to the TV’s memoryProgramming channels automatically Adding and erasing channels manually Setting up your TVChanging channels Usingthe RemoteControl Adjusting the color convergenceSettingup YourTV TheTV’s Features Adjusting, you must perform steps 8 and 9 twiceSwitching between two channels Adjusting the channel settingsTV’s Features Programming your favorite channelsPress z to highlight Label Connecting yourTVLabeling channels Repeat to enter the rest of the characters Using the TV’s FeaturesWatching picture-in-picture PIP Setting Your UsingtheTV’s Features AppendixFreezing the PIP picture Switching the main and PIP picturesChanging the position of the PIP window Using the multi-window channel preview function Using the multi-window featureUsing the multi-window favorite channel scan function Using the multi-window strobe functionPress y or z to display the PIN code entering mode Using the Locks menuEntering the PIN code If you cannot remember your PIN codeConnecting YourTV Control Using the V-CHIP menuUsing Remote Setting YourTV UsingtheTV’s Features AppendixBlocking Option Mpaa Rating Independent rating system for moviesTV None Rating Chip MenuCH Lock Locking channelsUnlocking programs temporarily Locking the front panel buttons Locking the video inputsChanging the PIN code Front Panel LockSelecting the picture mode Adjusting the pictureAdjusting the picture quality See ÒSaving your new picture preferencesÓ onUsing the noise reduction feature Using the flesh tone featureSaving your new picture preferences Noise ReductionResetting your picture adjustments Selecting the color temperatureSettingup YourTV UsingtheTV’s Features Appendix OFFSelecting the video source labels Watching video inputDTV SATIntroduction Connecting YourTV Usingthe RemoteControl Using the closed caption featureSettingup YourTV UsingtheTV’s Features ¥ To turn off the closed caption feature, highlight OFFTo display the time on-screen Press Recall Setting the sleep timerSetting the clock Selecting stereo/SAP broadcasts Adjusting the soundMuting the sound Using the surround sound feature Resetting your audio adjustments Adjusting the sound qualityTurning off the built-in speakers Using the sub-bass system SBSTo turn off the SBS Highlight OFF in above To turn on the built-in speakers Highlight on in aboveTo turn off the StableSound feature Highlight OFF in above Using the StableSound featureSelecting the Audio OUT sound MainDisplaying on-screen information Viewing the demonstration modeSelecting the background of the menu display Understanding the last mode memory feature Understanding the auto power off featureAppendix SpecificationsVIDEO1, VIDEO2, VIDEO3 TroubleshootingLimited United States Warranty Limited Canada Warranty Manufactured by
Top Page Image Contents