Toshiba 53AX62 owner manual Adjusting the sound, Muting the sound, Selecting stereo/SAP broadcasts

Page 45

Adjusting the sound

Muting the sound

Press MUTE to temporarily reduce (1/2 mute) or turn off (mute) the sound. The screen will display “1/2 MUTE” or “MUTE” in the lower right corner. Each time MUTE is pressed, the mute mode changes in the following order:

1/2 MUTE → MUTE → Normal

When the TV is muted, the closed caption feature (page 43) is automatically activated (but only if the closed caption mode is set to OFF). To turn off captions, press MUTE again.

Selecting stereo/SAP broadcasts

The multi-channel TV sound (MTS) feature allows you to listen to high-fidelity stereo sound while watching your TV. MTS can also transmit a second audio program (SAP) containing a second language, music, or other audio information (if available in your area).

When the TV receives a stereo or SAP broadcast, the word STEREO or SAP appears on-screen every time the TV is turned on, the channel is changed, or RECALL is pressed.

Note: The MTS feature is not available when the TV is in VIDEO or ColorStream mode.

To listen to stereo sound:

1.Press MENU, and then press x or • until the AUDIO menu appears.

MENU

yzx •

MUTE RECALL

Introduction

 

 

 

 

 

Connecting

yourTV

 

 

 

 

Usingthe

RemoteControl

 

 

up

TV

AUD I O

MTSMONO

BASS5 0

TREBLE5 0

BALANCE0

RESET

2.Press y or z to highlight MTS.

3.Press x or • to highlight STEREO.

AUD I O

 

MTS

STEREO / SAP / MONO

BASS

5 0

TREBLE

5 0

BALANCE

0

RESET

 

If you leave the TV in STEREO mode, it will automatically output the type of sound being broadcast (stereo or monaural).

If the stereo sound is noisy, select MONO to reduce the noise. The word STEREO or SAP is displayed in yellow in the menu when the TV receives the signal.

To listen to SAP (if available):

1.Press MENU, and then press x or • until the AUDIO menu appears.

2.Press y or z to highlight MTS.

3.Press x or • to highlight SAP. You will hear the station’s second audio program (if available) from the speakers, while viewing the program’s normal picture (see note at right).

Note:

A second audio program (SAP) can be heard only on those TV stations that offer it. If you have SAP on, and the station the TV is currently tuned to is in SAP mode but is not currently playing a second audio program, you will see the picture but may not hear sound. If this happens, turn SAP off.

Setting

your

 

 

UsingtheTV’s

Features

 

 

 

 

Appendix

 

 

 

45

Image 45
Contents 53AX62 Dear Customer Safety PrecautionsInstallation Important Safety InstructionsCare ServiceImportant Safety Information Introduction Welcome to Toshiba Exploring your new TVIntroduction Connecting a VCR Connecting your TVConnecting a cable converter box and a VCR Connecting a cable converter boxYour You will need Three coaxial cablesIntroduction Connecting YourTV Control Connecting a DVD player/satellite receiver and a VCRUsing Remote Settingup YourTV TheTV’s Features UsingConnecting two VCRs Connecting a DVD player with ColorStream component FromConnecting your TV Video and a VCRConnecting an audio system Connecting a camcorderDolby Pro Logic* surround sound system Connection example Connecting an A/V receiverPreparing the remote control for use Installing the remote control batteriesUsingtheTVÕs Features Appendix Remote control functional key chart Using the Remote ControlDisc AM/FM Device code setup Searching and sampling the code of a deviceRecall Using the Volume Lock feature Operational feature resetVerifying the device code Device code table Cable box setup codesVCR setup codes DVD setup codes CD Player setup codes Amplifier setup codes Learning about the remote control Learning about the menu system Introduction Connecting YourTVSelecting the antenna input Changing the on-screen display languageUp TV Press x or to highlight your desired languageAdding channels to the TV’s memory Programming channels automaticallyPress y or z to select CH Program Setting up your TV Changing channelsAdding and erasing channels manually Usingthe RemoteControl Adjusting the color convergenceSettingup YourTV TheTV’s Features Adjusting, you must perform steps 8 and 9 twiceSwitching between two channels Adjusting the channel settingsTV’s Features Programming your favorite channelsConnecting yourTV Labeling channelsPress z to highlight Label Repeat to enter the rest of the characters Using the TV’s FeaturesWatching picture-in-picture PIP Setting Your UsingtheTV’s Features AppendixSwitching the main and PIP pictures Changing the position of the PIP windowFreezing the PIP picture Using the multi-window channel preview function Using the multi-window featureUsing the multi-window favorite channel scan function Using the multi-window strobe functionPress y or z to display the PIN code entering mode Using the Locks menuEntering the PIN code If you cannot remember your PIN codeConnecting YourTV Control Using the V-CHIP menuUsing Remote Setting YourTV UsingtheTV’s Features AppendixBlocking Option Mpaa Rating Independent rating system for moviesTV None Rating Chip MenuLocking channels Unlocking programs temporarilyCH Lock Locking the front panel buttons Locking the video inputsChanging the PIN code Front Panel LockSelecting the picture mode Adjusting the pictureAdjusting the picture quality See ÒSaving your new picture preferencesÓ onUsing the noise reduction feature Using the flesh tone featureSaving your new picture preferences Noise ReductionResetting your picture adjustments Selecting the color temperatureSettingup YourTV UsingtheTV’s Features Appendix OFFSelecting the video source labels Watching video inputDTV SATIntroduction Connecting YourTV Usingthe RemoteControl Using the closed caption featureSettingup YourTV UsingtheTV’s Features ¥ To turn off the closed caption feature, highlight OFFSetting the sleep timer Setting the clockTo display the time on-screen Press Recall Adjusting the sound Muting the soundSelecting stereo/SAP broadcasts Using the surround sound feature Resetting your audio adjustments Adjusting the sound qualityTurning off the built-in speakers Using the sub-bass system SBSTo turn off the SBS Highlight OFF in above To turn on the built-in speakers Highlight on in aboveTo turn off the StableSound feature Highlight OFF in above Using the StableSound featureSelecting the Audio OUT sound MainViewing the demonstration mode Selecting the background of the menu displayDisplaying on-screen information Understanding the last mode memory feature Understanding the auto power off featureAppendix SpecificationsVIDEO1, VIDEO2, VIDEO3 TroubleshootingLimited United States Warranty Limited Canada Warranty Manufactured by