Answeringns ering anan incincominging callcall
•When an incoming call is received the phone will ring and flash, to answer the call lift the handset and speak.
•On completion of the call, carefully replace the handset in the cradle to release the line.
Making a call
Making a call
•Lift handset and dial required number.
•On completion of the call, replace the handset in the cradle.
Sendingending voluvolumee adjustadjustmentent
If your voice is quiet or called parties have difficulty hearing you, you can slightly increase the sending level volume with the sending volume switch located on the back of the phone. You can also decrease the sending volume if required.
Minimum | Normal |
Maximum |
LastLastnumbernumberredialredial
1.Lift the handset.
2.Listen. for dial tone and press 
/P redial button.
Note: The previously dialled number will be automatically redialled (not in use for memory numbers).
Muteute buttonbutton
If you wish to speak privately to someone else, hold the 
button. You will still be able to hear the callers but they cannot hear you during the mute operation. To resume normal
conversation, release the 
button.
StoringStoringtelephonetelephonenumbersnumbers
Your phone can store 12 one touch memories (21 digits maximum for each memory).
To store a number please follow instructions below:
1.Lift the handset.
2.Press 
button.
3.Press M1, M2, ..., M12 numbers to locate the number.
4.Dial the number you wish to store.
5.Press 
button again.
Note: Numbers will be lost after a few hours if you disconnect your phone from the telephone line. Entering a new number in memory will automatically erase the previous number stored in that location.
11 | 12 |
