Toshiba 65HM117, 57HM117 manual Introduction

Page 10

57HM117_EN.book Page 10 Friday, March 23, 2007 9:48 AM

Chapter 1: Introduction

Overview of steps for installing, setting up, and using your new TV

Follow these steps to set up your TV and begin using its many exciting features.

1 Carefully read the important safety, installation, care, and service information. Keep this manual for future reference.

2 Observe the following when choosing a location for the TV:

Read “Important notes about your DLP® projection TV” (- page 6).

Place the TV on the applicable optional TV stand listed in the “Specifications” section (if available for this TV model) or on a sturdy, level, stable surface that can safely support the size and weight of the unit.

Place the TV in a location where light does not reflect on the screen.

Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY.

3 Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.

4 BEFORE connecting cables or devices to the TV, learn

the functions of the TV’s connections and controls (- pages 11–12).

5 Connect your other electronic device(s) to the TV (- pages 13–21).

6 Install the batteries in the remote control (- page 22).

7 See “Learning about the remote control” (- page 23) for an overview of the buttons on the remote control.

8 Program the remote control to operate your other device(s) (- pages 24–28).

9 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices.

10 After you plug in the TV power cord, the yellow LED (on the TV front) will blink 3 times. Wait several seconds until the yellow LED stops blinking and then press pon the TV or remote control.

See “LED indications” (- page 62).

11 See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system (- page 29).

12 Program channels into the TV’s channel memory (- page 32).

13 For details on using the TV’s features, see Chapters 6 and 7.

14 For help, refer to the Troubleshooting Guide, Chapter 8. 15 For lamp unit replacement instructions, see Chapter 9.

16 For technical specifications and warranty information, see Chapter 9.

17 Enjoy your new TV!

10

HM117 (E/F) Web 213:276

Image 10
Contents 57HM117 65HM117 Safety Precautions Dear CustomerAdditional Safety Precautions Important Safety InstructionsInstallation, Care, and Service InstallationService CarePart Important notes about your DLP projection TV Voice announce featureTrademark Information Contents Index Welcome to Toshiba Features of your new TVIntroduction DeathIntroduction HD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC TV front and side panel controls and connectionsBlue, Yellow, and Green/Red Control panelTV back panel connections ColorStream HD-1 and ColorStream HD-2Overview of cable types Connecting your TVAbout the connection illustrations You will need Connecting a VCR and antenna or Cable TV no Cable boxTo view the antenna or Cable signal To view the VCRCoaxial cables Video cable Connecting a VCR with S-video and a cable boxTo view basic and premium Cable channels Standard audio cablesTo view the VCR or view and record antenna channels To view antenna or Cable channelsTo view the DVD player To record a TV program while watching a DVDTo control the devices To connect the IR blaster cableIf you cannot locate the device’s infrared sensor To view the camcorder video Connecting a camcorderSelect the Video 2 video input source on the TV To view the Hdmi device video Connecting an Hdmi or DVI device to the Hdmi inputTo connect an Hdmi device, you will need To connect a DVI device, you will needConnecting an audio system To control the audioTo connect a PC to the PC in terminal on the TV Connecting a personal computer PCFormat Resolution Frequency To connect a PC to the Hdmi terminal on the TVInstalling the remote control batteries Using the remote controlPreparing the remote control for use Remote control effective rangeLearning about the remote control TheaterWide 1/2/3, Full, and 43 HDVCR, set the Mode Select switch to AUX Using the remote control to control your other devicesTo use your TV remote control to operate a DVD player or HTIB, set the Mode Select switch toRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices TV/VCR Combo Cable converter boxSatellite receiver DVD/VCR ComboHtib Main menu layout Menu layout and navigationIcon Option Installation Setup/Installation menu layoutSetup menu Navigating the menu systemSelecting the menu language Setting up your TVTo configure the ANT input source To select the menu languageTo program channels automatically Programming channels automaticallyManually adding and deleting channels in the channel memory To add or delete channels in the channel memoryLabeling channels To create and assign a custom label Setting the Hdmi audio modeTo set the Hdmi audio mode To delete the custom labelTo view the digital signal meter Viewing the digital signal meterTo set the Power-On Mode feature To close the screen and return to the Terrestrial menuTo cancel the reset To close the screen and return to the Installation menuReset Factory Defaults Viewing the system statusLabeling the video input sources Using the TV’s featuresSelecting the video input source to view To select the video input source to viewTuning channels using Channel Browser Tuning channelsFavorites Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History ListSwitching between two channels using Channel Return Tuning to a specific channel programmed or unprogrammedSwitching between two channels using SurfLock TheaterWide 1 picture size for 43 format programs Selecting the picture sizeNatural picture size TheaterWide 2 picture size for letter box programsTo set the scroll settings Full picture size for 169 480i, 480p source programs onlyTo set the Cinema Mode to Film To turn on the auto aspect ratio featureTo turn off the auto aspect ratio feature To set the Cinema Mode to VideoSelecting the picture mode Adjusting the pictureAdjusting the picture quality Base closed captions Using the closed caption modeDigital CC Settings To view captions or textCC Selector Adjusting the audioUsing the digital audio selector Muting the soundSelecting stereo/SAP broadcasts Adjusting the audio qualityTo adjust the audio quality To listen to stereo soundUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureIf you cannot remember your PIN code Using the Locks menuEntering the PIN code Changing your PIN codeTo block and unblock TV programs and movies Press b to highlight Enable Rating BlockingBlocking TV programs and movies by rating V-Chip To download the additional rating system if availableTo block channels Blocking channelsTo unblock individual channels Using the input lock feature Unlocking programs temporarilyTo adjust the PC settings Using the PC settings featureUsing the control panel lock feature To lock the control panelSetting the PC Audio Setting the sleep timerTo display TV status information using Recall Understanding the auto power off featureUnderstanding the last mode memory feature To display TV status information using InfoUsing dynamic contrast Using the TV’s advanced featuresUsing the advanced picture settings features Using the static gamma featureTo select the color temperature Selecting the color temperatureSelecting the lamp mode To select the lamp modeCableClear field, select your desired setting Using Mpeg noise reductionTo change the CableClear settings To select the Mpeg noise reduction levelUsing the Game Mode feature Using the advanced audio settings featuresUsing the SRS WOW surround sound feature Troubleshooting General troubleshootingClosed caption problems Remote control problemsChannel tuning problems Rating blocking V-Chip problemsLED Indication Condition Solution Voice Announce LED indicationsAppendix Lamp unit replacement and careWhen to replace the lamp unit CanadaHow to replace the lamp unit Required toolsReplace the screw and tighten using a manual screwdriver Disposing of the used lamp unitSpecifications Pin No Signal nameLimited United States Warranty For DLP Television ModelsLimited Canadian Warranty For Toshiba Brand DLP Television ModelsArbitration and Dispute Resolution 57HM117EN.book Page 70 Friday, March 23, 2007 948 AM Index Programming57HM117EN.book Page 72 Friday, March 23, 2007 948 AM 57HM117EN.book Page 73 Friday, March 23, 2007 948 AM 07-04

65HM117, 57HM117 specifications

The Toshiba 57HM117 and 65HM117 are part of Toshiba's line of rear projection televisions that offered consumers a compelling blend of advanced technology and large screen entertainment, ideal for movie enthusiasts and gamers alike.

One of the standout features of these models is their impressive screen size, providing a cinema-like experience right from the comfort of home. The 57HM117 comes with a screen size of 57 inches, while the 65HM117 boasts an even larger 65-inch display, making both models suitable for expansive living spaces or home theaters.

Both televisions employ Toshiba's DLP (Digital Light Processing) technology, which utilizes micro-mirrors to produce bright and sharp images. This technology is known for its ability to deliver vibrant colors and a high contrast ratio, enhancing the overall viewing experience. The 57HM117 and 65HM117 support a native resolution of 1080p, which means they can display high-definition content with remarkable clarity and detail, perfect for enjoying Blu-ray films or high-definition broadcasts.

In terms of connectivity, these models are equipped with multiple inputs, including HDMI, component, and composite connections, allowing users to easily connect a range of devices such as DVD players, gaming consoles, and streaming devices. This versatility ensures that users can enjoy a wide variety of content with ease. Additionally, they feature integrated digital tuners for access to over-the-air broadcast channels.

Another notable characteristic is Toshiba’s variable picture modes, which allow users to customize their viewing preferences depending on the content being viewed or the ambient light in the room. Options typically include settings designed for sports, movies, and standard viewing.

The design of both televisions is sleek and modern, complementing any home decor. The rear projection technology means that they can be placed close to walls, making them a suitable choice for smaller spaces without sacrificing the size of the screen.

Ultimately, the Toshiba 57HM117 and 65HM117 televisions represent a blend of innovative technology and user-friendly features, making them a strong choice for anyone looking to enhance their home entertainment experience.