Toshiba 65HM117, 57HM117 manual Troubleshooting, General troubleshooting

Page 60

57HM117_EN.book Page 60 Friday, March 23, 2007 9:48 AM

Chapter 8: Troubleshooting

General troubleshooting

Before calling a service technician, please check this chapter for a possible cause of the problem and some solutions you can try.

Black box on-screen

The closed caption feature is set to one of the Text modes (T1, T2, T3, or T4). Set the closed caption feature to Off (- page 45).

TV stops responding to controls

If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, press and hold the POWER button on the TV control panel for 5 or more seconds to reset the TV.

Other problems

If your TV’s problem is not addressed in this Troubleshooting section or the recommended solution has not worked, use the Restore Factory Defaults procedure (- page 36).

TV will not turn on

Make sure the power cord is plugged in, and then press p.

The remote control batteries may be dead. Replace the batteries or try the control panel buttons.

If you have recently replaced the lamp unit, make sure the lamp unit and lamp unit door are installed properly (- pages 63–65).

The lamp unit may need to be replaced (-pages 63–65). Also see “LED indications” (- page 62).

If the TV is powered off and then quickly on again when the lamp unit is hot, it may take several minutes for the picture to appear on-screen. This is a property of DLP® TV lamp technology and is NOT a sign of malfunction. For details, see “IMPORTANT NOTICE ABOUT HOT LAMP RESTART” (- page 6).

Picture problems

General picture problems

Check the antenna/cable connections (- Chapter 2).

Press +on the remote control or TV and select a valid video input source (- page 37). If no device is connected to a particular input on the TV, no picture will display when you select that particular input source. For device connection details, see Chapter 2.

Antenna reception may be poor. Use a highly directional outdoor antenna (if applicable).

The station may have broadcast difficulties. Try another channel.

Adjust the picture qualities (- page 44).

If you are using a VCR, make sure lon the remote control is set correctly (- page 24).

Do not connect both a standard video cable and an S-video cable to the VIDEO 2 input at the same time (- page 15).

60

Noisy picture

If you are watching an analog channel (off-air broadcast or Cable TV), you can set the CableClear®/DNR feature to AUTO to reduce visible interference in the TV picture (- page 58).

Video Input Selection problems

If the Input Selection window does not appear when you press +on the remote control or TV, press +a second time, which will change to the next video input source and display the Input Selection window.

Cannot view external signals or channel 3 or 4

If you cannot view signals from external devices connected to VIDEO 1, VIDEO 2, ColorStream®,

HDMI 1, HDMI 2, HDMI 3, PC, or from channels 3 or 4, make sure the Input Lock is set to Off (- page 52).

Poor color or no color

The station may have broadcast difficulties. Try another channel.

Adjust the Tint and/or Color (- page 44).

Picture brightness changes soon after turning on TV

If you set the lamp mode to Low Power, each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time. You may notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction (- page 57).

Poor composite or S-video picture

If the TV is connected to an external A/V device (e.g., DVD player, video game system, set-top box, etc.) try using a ColorStream or HDMI video connection instead.

Picture and sound are out of sync

As with all products that contain a digital display, in rare instances, when viewing certain content (e.g.. television broadcasts, video games, DVDs), you may notice that the sound and picture are slightly out of sync. This phenomenon can be caused by various factors including, without limitation, video processing within the TV, video processing in an attached gaming system, and video processing or different compression rates used by broadcasters in their programming. You may want to try one or more of the following suggestions, which may help to reduce the effect of this phenomenon:

If the TV is connected to an A/V receiver that has a programmable audio delay feature, use this feature to help synchronize the sound to the picture.

If you notice this phenomenon only on certain TV channels, please contact your local broadcast, cable, or satellite provider to inform them of this issue.

LED indications while in reboot from standby

When you plug the power cord in, the yellow LED will blink until the TV enters standby mode, (plugged in but not powered on). This is normal and is not a sign of malfunction.

Sound problems

Check the antenna/cable connections (- Chapter 2).

The station may have broadcast difficulties. Try another channel.

HM117 (E/F) Web 213:276

Image 60
Contents 57HM117 65HM117 Safety Precautions Dear CustomerImportant Safety Instructions Installation, Care, and ServiceAdditional Safety Precautions InstallationService CarePart Voice announce feature Important notes about your DLP projection TVTrademark Information Contents Index Features of your new TV IntroductionWelcome to Toshiba DeathIntroduction TV front and side panel controls and connections Blue, Yellow, and Green/RedHD1, ColorStream HD2, Hdmi 1, Hdmi 2, Hdmi 3, PC Control panelTV back panel connections ColorStream HD-1 and ColorStream HD-2Connecting your TV Overview of cable typesAbout the connection illustrations Connecting a VCR and antenna or Cable TV no Cable box To view the antenna or Cable signalYou will need To view the VCRConnecting a VCR with S-video and a cable box To view basic and premium Cable channelsCoaxial cables Video cable Standard audio cablesTo view antenna or Cable channels To view the DVD playerTo view the VCR or view and record antenna channels To record a TV program while watching a DVDTo connect the IR blaster cable To control the devicesIf you cannot locate the device’s infrared sensor Connecting a camcorder To view the camcorder videoSelect the Video 2 video input source on the TV Connecting an Hdmi or DVI device to the Hdmi input To connect an Hdmi device, you will needTo view the Hdmi device video To connect a DVI device, you will needConnecting an audio system To control the audioConnecting a personal computer PC Format Resolution FrequencyTo connect a PC to the PC in terminal on the TV To connect a PC to the Hdmi terminal on the TVUsing the remote control Preparing the remote control for useInstalling the remote control batteries Remote control effective rangeLearning about the remote control TheaterWide 1/2/3, Full, and 43 HDUsing the remote control to control your other devices To use your TV remote control to operate aVCR, set the Mode Select switch to AUX DVD player or HTIB, set the Mode Select switch toRemote Control functional key chart AUX 1 VCRProgramming the remote control to control your other devices Cable converter box Satellite receiverTV/VCR Combo DVD/VCR ComboHtib Menu layout and navigation Main menu layoutIcon Option Setup/Installation menu layout Setup menuInstallation Navigating the menu systemSetting up your TV To configure the ANT input sourceSelecting the menu language To select the menu languageProgramming channels automatically Manually adding and deleting channels in the channel memoryTo program channels automatically To add or delete channels in the channel memoryLabeling channels Setting the Hdmi audio mode To set the Hdmi audio modeTo create and assign a custom label To delete the custom labelViewing the digital signal meter To set the Power-On Mode featureTo view the digital signal meter To close the screen and return to the Terrestrial menuTo close the screen and return to the Installation menu Reset Factory DefaultsTo cancel the reset Viewing the system statusUsing the TV’s features Selecting the video input source to viewLabeling the video input sources To select the video input source to viewTuning channels Tuning channels using Channel BrowserFavorites Browser Elements of the Channel Browser Adding and clearing channels and inputs in the History ListTuning to a specific channel programmed or unprogrammed Switching between two channels using Channel ReturnSwitching between two channels using SurfLock Selecting the picture size Natural picture sizeTheaterWide 1 picture size for 43 format programs TheaterWide 2 picture size for letter box programsTo set the scroll settings Full picture size for 169 480i, 480p source programs onlyTo turn on the auto aspect ratio feature To turn off the auto aspect ratio featureTo set the Cinema Mode to Film To set the Cinema Mode to VideoAdjusting the picture Selecting the picture modeAdjusting the picture quality Using the closed caption mode Digital CC SettingsBase closed captions To view captions or textAdjusting the audio Using the digital audio selectorCC Selector Muting the soundAdjusting the audio quality To adjust the audio qualitySelecting stereo/SAP broadcasts To listen to stereo soundUsing the StableSound feature Using the Dolby Digital Dynamic Range Control featureUsing the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN codePress b to highlight Enable Rating Blocking Blocking TV programs and movies by rating V-ChipTo block and unblock TV programs and movies To download the additional rating system if availableBlocking channels To block channelsTo unblock individual channels Using the input lock feature Unlocking programs temporarilyUsing the PC settings feature Using the control panel lock featureTo adjust the PC settings To lock the control panelSetting the PC Audio Setting the sleep timerUnderstanding the auto power off feature Understanding the last mode memory featureTo display TV status information using Recall To display TV status information using InfoUsing the TV’s advanced features Using the advanced picture settings featuresUsing dynamic contrast Using the static gamma featureSelecting the color temperature Selecting the lamp modeTo select the color temperature To select the lamp modeUsing Mpeg noise reduction To change the CableClear settingsCableClear field, select your desired setting To select the Mpeg noise reduction levelUsing the advanced audio settings features Using the Game Mode featureUsing the SRS WOW surround sound feature Troubleshooting General troubleshootingRemote control problems Channel tuning problemsClosed caption problems Rating blocking V-Chip problemsLED Indication Condition Solution Voice Announce LED indicationsLamp unit replacement and care When to replace the lamp unitAppendix CanadaHow to replace the lamp unit Required toolsReplace the screw and tighten using a manual screwdriver Disposing of the used lamp unitSpecifications Pin No Signal nameLimited United States Warranty For DLP Television ModelsLimited Canadian Warranty For Toshiba Brand DLP Television ModelsArbitration and Dispute Resolution 57HM117EN.book Page 70 Friday, March 23, 2007 948 AM Index Programming57HM117EN.book Page 72 Friday, March 23, 2007 948 AM 57HM117EN.book Page 73 Friday, March 23, 2007 948 AM 07-04

65HM117, 57HM117 specifications

The Toshiba 57HM117 and 65HM117 are part of Toshiba's line of rear projection televisions that offered consumers a compelling blend of advanced technology and large screen entertainment, ideal for movie enthusiasts and gamers alike.

One of the standout features of these models is their impressive screen size, providing a cinema-like experience right from the comfort of home. The 57HM117 comes with a screen size of 57 inches, while the 65HM117 boasts an even larger 65-inch display, making both models suitable for expansive living spaces or home theaters.

Both televisions employ Toshiba's DLP (Digital Light Processing) technology, which utilizes micro-mirrors to produce bright and sharp images. This technology is known for its ability to deliver vibrant colors and a high contrast ratio, enhancing the overall viewing experience. The 57HM117 and 65HM117 support a native resolution of 1080p, which means they can display high-definition content with remarkable clarity and detail, perfect for enjoying Blu-ray films or high-definition broadcasts.

In terms of connectivity, these models are equipped with multiple inputs, including HDMI, component, and composite connections, allowing users to easily connect a range of devices such as DVD players, gaming consoles, and streaming devices. This versatility ensures that users can enjoy a wide variety of content with ease. Additionally, they feature integrated digital tuners for access to over-the-air broadcast channels.

Another notable characteristic is Toshiba’s variable picture modes, which allow users to customize their viewing preferences depending on the content being viewed or the ambient light in the room. Options typically include settings designed for sports, movies, and standard viewing.

The design of both televisions is sleek and modern, complementing any home decor. The rear projection technology means that they can be placed close to walls, making them a suitable choice for smaller spaces without sacrificing the size of the screen.

Ultimately, the Toshiba 57HM117 and 65HM117 televisions represent a blend of innovative technology and user-friendly features, making them a strong choice for anyone looking to enhance their home entertainment experience.