Toshiba 65HM117, 57HM117 manual Setting the Hdmi audio mode, To create and assign a custom label

3 Press BbC c to highlight No Label and press T.

Channel Labeling

4 Repeat steps 2 and 3 for other channels.

5 To save your settings, highlight Done and press T.

If the desired channel label is not available from the list of presets, you can create a custom label.

To create and assign a custom label:

1 Open the Channel Labeling window.

2 Press <or ,to select a channel you want to label. 3 Press Bb c to highlight Custom and press T.

The software keyboard will appear.

Channel Labeling

Clear All

Done

4 Repeatedly press the corresponding key on the remote control to highlight the desired character on the on-screen software keyboard.

5 The highlighted character is entered after you either press a different key, press c key, or after a two-second pause.

6 Repeat steps 4 and 5 until you have entered all desired text.

7 When finished, press T.

8 (New labels will be added to the list in alphabetical order and marked with an icon to indicate that they are custom.) Highlight the new custom label and press Tto assign. Assigned channel labels will be displayed in the banner, Channel Add/Delete window, and Channels Block window.

To delete the custom label:

1 Open the Channel Labeling window.

2 Highlight the label to be deleted and press =.

3 Highlight Yes from the deletion confirmation window and press T.

Channel Labeling

TOCDEFGDone

4 Highlight Done and press Tto save changes, and go back to the Channel Labeling window.

Setting the HDMI™ audio mode

To set the HDMI audio mode:

1

2

3 Press B or b to select HDMI 1 Audio and then press

Cor c to select the HDMI 1 audio mode (Auto, Digital, or Analog). (Auto is the recommended mode.) See “Connecting an HDMI or DVI device to the HDMI input” (- page 19).

Audio Setup

Note: Because the PC and HDMI-1 inputs share the same set of analog audio inputs, the PC Audio menu setting influences the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to “Yes,” the HDMI 1 Audio setting is set to “Digital” and is grayed out in the menu. (Also see item 3 on page 12 and “Setting the PC Audio” on page 54.)