94940 Revised Size 10/18/02 12:22 PM Page 10
Programming For DBS Satellite System
Most GE, RCAand ProScan Satellite systems will not require programming. Check to see if your DBS Satellite system responds to the remote before you begin programming.
1.Manually turn on the DBS system. Find the three digit code for your DBS
system at the back of the instructions.
2.Press and hold the
CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release the
CBL/SAT button (The INDI- | CBL/SAT |
| |
CATOR LIGHT will blink |
|
then remain lit. |
|
4. Enter the code using the |
|
Number Buttons. After your |
|
code is entered, the INDI- |
|
CATOR LIGHT will turn off. |
|
If the code is not valid, the |
|
INDICATOR LIGHT will |
|
blink. Check the code list |
|
and repeat process. |
|
5. Aim the remote at your |
|
DBS system and press the |
|
ON•OFF button. Your DBS |
|
system should turn off. |
|
6. With your DBS System |
|
on, press CHAN+ (CHAN- |
|
NELUP). If the satellite sys- |
|
tem responds, no further |
|
programming is required. |
|
NOTE: If your DBS system does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on Page 12.
7.Enter your code here for easy reference.
CBL/SAT CODE
9