94940 Revised Size 10/18/02 12:22 PM Page 13
Programming For AUX 1 or AUX 2 Buttons
With the AUX 1 and AUX2 buttons, you can assign a second TV, DVD, CD player, VCR, Satellite System, or Cable Box to it.
1.Manually turn on the device you wish to control. Find the three digit code for the device you wish to program in the code list at the back of the instructions.
2.Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODESEARCH button.
3.Press and release the AUX 1 or AUX 2 button (The INDICATOR LIGHT will blink then remain lit.)
4.Enter the code using the Number Buttons. After your code is entered, the
INDICATOR
LIGHT will turn off. If the code is not valid, the INDI- CATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at the device you wish to control and press the ON•OFF button. The device should turn off.
6.With your device on, press CHAN+ (CHANNEL UP) button. If the device responds, no further pro- gramming is required.
NOTE: If your device does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 12.
7.Enter your code and the type of device you programmed here for easy reference.
AUX 1 CODE
AUX 2 CODE
12