94940 Revised Size 10/18/02 12:22 PM Page 15
Programming With Code Search
If your TV, VCR, DVD player, DBS Satellite System, Cable Box or CD player does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching your code by follow- ing the steps below:
1.Manually turn on the device you wish to program.
2.Press and hold the CODE SEARCH until the INDICATOR LIGHT lights, then release
CODE SEARCH.
3. Press and release the device |
|
|
|
|
| |
CD | AUX | |||||
CBL/SAT | ||||||
button for the device you |
|
|
|
|
| |
are programming. The INDI- |
|
|
|
|
| |
CATORLIGHT will blink |
|
|
|
|
| |
once, then remain lit. |
|
|
|
|
|
NOTE: For AUX programming carry out programming pro- cedure on page 11 for the device you are assigning to AUX prior to starting a Code Search.
4.Press and release ON•OFF until your device turns off.
5.When your device turns off,
press ENTER, the INDICATOR LIGHT will turn off.
Identifying Codes From Your Universal Remote
If you need to find the
procedure.
1.Press and hold CODE SEARCH until the INDICA- TOR LIGHT lights, then release CODESEARCH.
2.Press and release the device button for the code you are retrieving. The INDI- CATORLIGHT will blink once.
CD AUX CBL/SAT
14