94940 Revised Size 10/18/02 12:22 PM Page 11
Programming For Cable
1.Manually turn on the Cable Box. Find the three digit code for your Cable Box at the back of the instructions.
2.Press and hold the
CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3. Press and release | CBL/SAT |
the CBL/SAT button |
|
(The INDICATOR |
|
LIGHT will blink then |
|
remain lit. |
|
4.Enter the code using the Number Buttons. After your code is entered, the
INDICATOR LIGHT will turn off. If the code
is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at
your CABLE and press the ON•OFF button. Your CABLE should turn off.
6.With your Cable Box on, press CHAN+ (CHANNELUP). If the Cable Box responds, no further programming is required.
NOTE: If your Cable Box does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on Page 12.
7.Enter your code here for easy reference.
10