94940 Revised Size 10/18/02 12:22 PM Page 7
Programming For TV
Most GE, RCAand ProScan TVs will not require pro- gramming. Check to see if your TV responds to the remote before you begin programming.
1.Manually turn on the TV. Find the three digit code for your TV in the code list at the back of the instruc- tions.
2.Press and hold the
CODESEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button.
3.Press and release the TV button (The INDICATOR LIGHT will blink then remain lit.
4.Enter the code using the Number Buttons. After your code is entered, the INDI- CATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process.
5.Aim the remote at your TV and press the ON•OFF button. Your TV should turn off.
NOTE: If your TV does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on Page 12.
6.With your TV on, press CHAN+ (CHANNELUP). If the TV responds, no further programming is required.
7.Enter your code here for easy reference.
6