GE 45608 manual Deleting All Learned Keys, Delete ALL

Page 17

5.The remote displays SELECT THE KEY TO LEARN TO. All keys except SET, Z-Wave,OK, or Arrows (scroll left & scroll right) are available for learning. Press the key you want to teach the command to.

6.The remote displays WHEN BACKLIGHT TURNS OFF PUSH TEACHING KEY. The backlight turns off. The display reads LEARNING NOW! PRESS TEACHING KEY. Press the teaching key on the original remote control.

7.If Learning is successful, then display and backlight turn back on. The remote displays SUCCESS! PUSH OK TO LEARN PUSH SET TO EXIT.

8.Press OK to learn another key or press SET to exit Learning mode. If you press OK, the remote returns to step 5 above and is ready to learn another key.

NOTE: If learning fails, the display reads LEARNING FAILED PUSH OK TO LEARN PUSH SET TO EXIT.

Possible causes for learning failure:

•Your remotes are too close to a UV source (i.e. in sun light, or close to fluorescent lighting)

•Your remotes are too far apart.

•The teaching remote is an RF (radio frequency) remote. Teaching remotes must be IR (infrared).

•The remotes’ IR LEDs are not aligned.

•Batteries in one or both remotes may not have a sufficient charge

Deleting All Learned Keys

To delete all learned keys for a selected device, perform the steps below:

1.From ADD LEARN KEY use the ARROW keys to scroll to DELETE LEARN KEY. Press OK.

2.The remote displays SELECT MODE THEN PUSH OK. The device name is displayed on the bottom line of the display (for example, TV). Use the ARROW keys to cycle through the available device types. Press OK.

3.The remote displays SELECT KEY TO DELETE OR PUSH OK TO

DELETE ALL.

4.Press OK. The remote displays DELETING ALL PUSH OK TO CONFIRM.

5.Press OK. The remote displays ALL LEARNED KEYS DELETED. PUSH OK TO DELETE MORE.

6.Press SET to exit

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Home Theater Remote Table of Contents Introduction Key Features includeChannel UP & Down Changes channel on active A/V device Audio/Video Key ChartPage Automatic Time-Out SetupBatteries Adding a Device by Entering Its Code Initial Setup Audio/Video DevicesAdding a Device by Searching for Its Code Viewing a Programmed Device Code Changing a Device CodeDeleting a Device Replacing a Device To Access the Advanced Functions MenuAdvanced Functions Audio/Video Devices Locking Volume Control to Other Devices Set Volume Control Volume LockRemoved from Volume Lock Volume LockThen Press OK SET to ReceiverKey Mover Key Macros Memory Full Macro Deleted Choose Another or OK to Exit LearningDelete ALL Deleting All Learned KeysAdjusting the LCD Timer Setting the LCD Display’s ContrastFrom Advanced FUNCTIONS, scroll to LCD TIMER. Press OK Deleting a Single Learned KeyResetting All Audio/Video Features Resetting the RemoteRisk of Fire Risk of Electrical Shock Risk of Burns Wave OverviewWave Terminology Things to consider regarding RF range Wireless RangeImportant Notes on New Remotes Mode Keys Wave Key ChartPage Adding a Device Node / Light to the Network Wave SetupDevices / Lights / Nodes Controlling an Individual Device Node / Light Add a device without assigning it to a specific number keyAdd a device and assign it to a specific number key Deleting a Device Node / Light From Your Network Setting a Light’s Brightness LevelTurning a Light On or Off To control a Group GroupsCreate a Group or Add a Device to a Group Deleting a Group ScenesRemoving a Device Node / Light From a Group To control a scene Adding a Device Node / Light to a SceneLabels Scene SetupRemoving a Device Node / Light From a Scene Deleting a SceneTurn all devices on or off All-On and All-Off ControlAdding or Excluding a Device To / From All Control EventsOFF only Adding an EventPage Enabling or Disabling an Individual Event ThermostatsEnabling or Disabling All Events Deleting an EventAdding a Thermostat Advanced ConfigurationControlling a Thermostat Deleting a ThermostatCopying information to or from the remote control To Change Advanced Configuration SettingsCreate Secondary Controller Value 1 =Network only To send only network information to a secondary remoteController Swap Controller Swap Transfer PrimaryReceiving Network and Device Information Recovering Network Information Resetting Your NetworkTo reset your network To recover network informationFCC Notice Network UpdateInteroperability with Z-WaveDevices Warranty For Audio Receiver Setup Codes for Compatible Brands of Audio/Video DevicesFor Audio CD Reproductores de CDs For Audio Accessory Accesorios de AudioFor Satellite Set Top Box Receptores de Satélite For Audio Accessory,For Satellite Set Top Box, For Video DVDFor Video DVD, cont. Reproductores DVD, Mitsubishi . . . . . . .0060, 0000 For Television Televisores For Video Accessory Accesorios de VideoElectroband Electrograph Electrohome . . . . .0154, 0000 For Television, cont. Televisores,Orion . . . . . .0017, 0236, 0463 0145, 0171

45608 specifications

The GE 45608, a locomotive model manufactured by General Electric, has made significant contributions to the freight rail industry since its inception. Known for its powerful performance and advanced technology, the GE 45608 is designed to meet the demanding needs of freight transport while ensuring reliability and efficiency.

One of the standout features of the GE 45608 is its robust engine. Utilizing a 12-cylinder V-type diesel engine, it produces substantial horsepower, enabling it to haul heavy loads over challenging terrains. The locomotive's propulsion system is complemented by advanced traction control technology, which enhances its pulling power and stability, particularly on inclines. This feature is vital for operations in regions with varying topography.

The GE 45608 is equipped with an advanced control system that provides real-time diagnostics and performance monitoring. This technology allows operators to track the locomotive's health and efficiency, ensuring it runs optimally throughout its service life. The user-friendly interface enables quick access to critical data, aiding in troubleshooting and maintenance planning.

Safety is another crucial aspect of the GE 45608's design. The locomotive includes multiple safety features such as dynamic braking systems, which provide effective stopping power while reducing wear on the wheels. Additionally, it incorporates enhancements like GPS-based location tracking and the latest in collision avoidance technology, ensuring safe operation in freight yards and on main lines.

In terms of fuel efficiency, the GE 45608 stands out among its peers. Its engine is designed to optimize fuel consumption while delivering the required power, making it a cost-effective choice for rail operators. This efficiency not only reduces operational costs but also lessens the environmental impact by lowering emissions.

The locomotive's build quality reflects GE's commitment to durability. Constructed with high-grade materials, including corrosion-resistant components, the GE 45608 is engineered for longevity, making it a valuable asset for any freight operation.

In summary, the GE 45608 is a locomotive that combines power, advanced technology, and rugged durability. Its significant features, including a strong engine, sophisticated control systems, safety enhancements, and efficiency measures, make it a reliable choice for the freight rail industry. As rail transport continues to evolve, the GE 45608 exemplifies the innovations that drive operational success.
Top Page Image Contents