GE 45608 manual Labels, Removing a Device Node / Light From a Scene, Scene Setup, Deleting a Scene

•To turn a SCENE off, press and release the CH - key for less than one second. The screen will display OFF above the selected SCENE.

Removing a Device (Node / Light) From a Scene

This only removes the device from a specific scene. The device is still part of your home control network and the scene still exists (if there is more than one device in the scene).

1.Enter Z-Wave setup mode and highlight

SCENE SETUP

2.Press OK; the screen will display ADD

3.Press the right arrow key once; the screen will display REMOVE.

4.Press OK; the screen will display SEL DIGIT

5.Press a digit (1-9) for the scene you wish to add the device to. Press SHIFT and the digit (1-9) if you are adding devices to scenes 10 through 18. The screen will display the scene you’ve chosen.

6.Press OK; the letter “W” will be displayed in the upper left hand corner and the Z-Wave light will begin blinking indicating the remote is waiting to remove your device.

7.Press the button on the device so it communicates with the remote.

8.When the screen displays SUCCESSFUL you have successfully removed the Node/Light from the scene.

Deleting a Scene

This only deletes the specific scene. All of the devices are still part of your home control network.

1.Enter Z-Wave setup mode and highlight SCENE SETUP

2.Press OK; the screen will display ADD

3.Press the right arrow key twice; the screen will display DELETE.

4.Press OK; the screen will display SEL DIGIT

5.Press a digit (1-9) for the scene you wish to add the device to. Press SHIFT and the digit (1-9) if you are adding devices to scenes 10 through 18. The screen will display the scene you’ve chosen.

6.Press OK; the screen will display SUCCESSFUL to indicate that the scene has been deleted.

Labels

Individual LIGHTS, GROUPS and SCENES can all be labeled to help identify their function or location in your home. The process is the same for all three.

32