GE 45608 manual Batteries, Automatic Time-Out, Setup

Page 6

Batteries

Four “AAA” Alkaline batteries (not included) are required.

Battery Use and Safety

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries or different types of batteries.

•If you do not plan to use the remote for an extended period, remove the batteries. They can leak chemicals that can destroy electronic parts.

•Dispose of old batteries promptly and properly. Do not burn or bury them.

To Install Batteries

1.Open the battery compartment cover (located on the back of the remote).

2.Note the + and - polarity symbols inside the battery compartment.

3.Insert the batteries, making sure their polarity matches the symbols in the compartment.

4.Replace the cover.

NOTE: The LCD screen will display BATTERY LOW to indicate that the batteries need to be replaced. The remote retains all its user settings except for the day & time while replacing the batteries.

Battery Conservation

If any key is pressed continuously for 30 seconds the remote will stop transmission to conserve battery life.

Automatic Time-Out

During programming, the remote will exit programming mode if 30 seconds elapses after the last key press.

If a key is pressed longer than 60 seconds while scrolling through the menu screen, the remote will time-out.

Setup

1.Make sure the remote is in A/V mode. (Press & release the large Z-Wave key at the top of the remote to cycle between A/V and Z-Wave modes.)

2.Press and hold the SET key to enter setup mode.

3.Use the ARROW keys to scroll through the menus and the OK key to select devices or actions.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Home Theater Remote Table of Contents Key Features include IntroductionAudio/Video Key Chart Channel UP & Down Changes channel on active A/V devicePage Setup BatteriesAutomatic Time-Out Initial Setup Audio/Video Devices Adding a Device by Entering Its CodeAdding a Device by Searching for Its Code Changing a Device Code Deleting a DeviceViewing a Programmed Device Code To Access the Advanced Functions Menu Advanced Functions Audio/Video DevicesReplacing a Device Set Volume Control Volume Lock Locking Volume Control to Other DevicesThen Press OK Volume LockRemoved from Volume Lock SET to ReceiverKey Mover Key Macros Memory Full Learning Macro Deleted Choose Another or OK to ExitDeleting All Learned Keys Delete ALLFrom Advanced FUNCTIONS, scroll to LCD TIMER. Press OK Setting the LCD Display’s ContrastAdjusting the LCD Timer Deleting a Single Learned KeyResetting the Remote Resetting All Audio/Video FeaturesWave Overview Risk of Fire Risk of Electrical Shock Risk of BurnsWave Terminology Wireless Range Things to consider regarding RF rangeImportant Notes on New Remotes Wave Key Chart Mode KeysPage Wave Setup Devices / Lights / NodesAdding a Device Node / Light to the Network Add a device without assigning it to a specific number key Add a device and assign it to a specific number keyControlling an Individual Device Node / Light Setting a Light’s Brightness Level Turning a Light On or OffDeleting a Device Node / Light From Your Network Groups Create a Group or Add a Device to a GroupTo control a Group Scenes Removing a Device Node / Light From a GroupDeleting a Group Adding a Device Node / Light to a Scene To control a sceneRemoving a Device Node / Light From a Scene Scene SetupLabels Deleting a SceneAll-On and All-Off Control Turn all devices on or offOFF only EventsAdding or Excluding a Device To / From All Control Adding an EventPage Enabling or Disabling All Events ThermostatsEnabling or Disabling an Individual Event Deleting an EventControlling a Thermostat Advanced ConfigurationAdding a Thermostat Deleting a ThermostatCreate Secondary Controller To Change Advanced Configuration SettingsCopying information to or from the remote control Value 1 =To send only network information to a secondary remote Network onlyController Swap Transfer Primary Controller SwapReceiving Network and Device Information To reset your network Resetting Your NetworkRecovering Network Information To recover network informationNetwork Update Interoperability with Z-WaveDevicesFCC Notice Warranty Setup Codes for Compatible Brands of Audio/Video Devices For Audio ReceiverFor Audio Accessory Accesorios de Audio For Audio CD Reproductores de CDsFor Audio Accessory, For Satellite Set Top Box Receptores de SatéliteFor Video DVD For Satellite Set Top Box,For Video DVD, cont. Reproductores DVD, Mitsubishi . . . . . . .0060, 0000 For Video Accessory Accesorios de Video For Television TelevisoresFor Television, cont. Televisores, Electroband Electrograph Electrohome . . . . .0154, 0000Orion . . . . . .0017, 0236, 0463 0145, 0171

45608 specifications

The GE 45608, a locomotive model manufactured by General Electric, has made significant contributions to the freight rail industry since its inception. Known for its powerful performance and advanced technology, the GE 45608 is designed to meet the demanding needs of freight transport while ensuring reliability and efficiency.

One of the standout features of the GE 45608 is its robust engine. Utilizing a 12-cylinder V-type diesel engine, it produces substantial horsepower, enabling it to haul heavy loads over challenging terrains. The locomotive's propulsion system is complemented by advanced traction control technology, which enhances its pulling power and stability, particularly on inclines. This feature is vital for operations in regions with varying topography.

The GE 45608 is equipped with an advanced control system that provides real-time diagnostics and performance monitoring. This technology allows operators to track the locomotive's health and efficiency, ensuring it runs optimally throughout its service life. The user-friendly interface enables quick access to critical data, aiding in troubleshooting and maintenance planning.

Safety is another crucial aspect of the GE 45608's design. The locomotive includes multiple safety features such as dynamic braking systems, which provide effective stopping power while reducing wear on the wheels. Additionally, it incorporates enhancements like GPS-based location tracking and the latest in collision avoidance technology, ensuring safe operation in freight yards and on main lines.

In terms of fuel efficiency, the GE 45608 stands out among its peers. Its engine is designed to optimize fuel consumption while delivering the required power, making it a cost-effective choice for rail operators. This efficiency not only reduces operational costs but also lessens the environmental impact by lowering emissions.

The locomotive's build quality reflects GE's commitment to durability. Constructed with high-grade materials, including corrosion-resistant components, the GE 45608 is engineered for longevity, making it a valuable asset for any freight operation.

In summary, the GE 45608 is a locomotive that combines power, advanced technology, and rugged durability. Its significant features, including a strong engine, sophisticated control systems, safety enhancements, and efficiency measures, make it a reliable choice for the freight rail industry. As rail transport continues to evolve, the GE 45608 exemplifies the innovations that drive operational success.
Top Page Image Contents