Sony KP-53VGB Connect the cable from the satellite, Connecting a satellite receiver SAT and a VCR

Connecting a satellite receiver (SAT) and a VCR

1 Connect the cable from the satellite

	antenna to tbe satellite receiver.
2	Attach	tbe	coaxial cable from		the
	incoming cable connection or antenna to
	VHF/UHF IN on the VCR.
3	Using	a coaxial		cable, connect	VHF/UHF
	OUT on tbe VCR to VHFiUHF on tbe
	projection		TV.
4	Using	AUDIO		and S VIDEO*	cables,
	connect AUDIO and S VIDEO OUT on the
	satellite receiver to AUDIO and S VIDEO
	IN on the		VCR.		$ V_OEO
5	Using	AUDIO		and S VIDEO*	cables,
	connect AUDIO and S VIDEO OUT on the
	VCR to AUDIO and S VIDEO IN on the
	projection TV (White-AUDIO Left, Red-
	AUDIO	Right).

*if your VCR is not equipped wilh S VIDEO, use a VIDEO cable (yelIow) instead of the S VIDEO cable,

Disconnect all power sources before making any connections.

{R_r of pr*_i_tion ?V}

3

Ye_'_ 5W_aV {not _appni_}

•To view input from the satellite receiver or

VCR, select the video input which your satellite receiver or VCR is connected to

by pressing TV/VIDEO on the remote controh