,Ji]i]i]i]i]i]i]i]i]i]i]:Precau iorm'l
Safety
•Operate the projection TV only on 120 V AC.
•The plug is designed, for safety purposes, to fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
•If any liquid or solid object should fall inside the cabinet, unplug the projection
TV immediately and have it checked by qualified service personnel before operating it further.
•If you will not be using the projection TV for several days, disconnect the power by
pulling the plug itself. Never pull on the cord.
Note on cleaning
Clean the cabinet of the projection TV with a dry soft cloth. To remove dust from the screen, wipe it gently with a soft cloth. Stubborn stains may be removed with a cloth
slightly dampened with solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for
cleaning.
If the picture becomes dark after using the projection TV for a long period of time, it may be necessary to clean the inside of the projection TV. Consult qualified service personnel.
Installing
•To prevent internal heat buildup, do not block the ventilation openings.
•Do not install the projection TV in a hot
or humid place, or in a place subject to excessive dust or mechanical vibration.
•Avoid operating the projection TV at
temperatures below 5 _ C (41 _ F).
•If the projection TV is transported
directly from a cold to a warm location,
or if the room temperature changes
suddenly, the picture may be blurred or show poor color. In this case, please wait a few hours to let the moisture evaporate before turning on the projection TV.
•To obtain the best picture, do not expose
the screen to direct illumination or direct
sunlight. It is recommended to use spot
lighting directed down from the ceiling or to cover the windows that face the
screen with opaque drapery. It is
desirable to install the projection TV in a room where the floor and walls are not of a reflective material.
2