Connecting a DVD Player (Upper illustration)
Using an AUDIO and S VIDEO cables, connect AUDIO and S VIDEO IN on the
projection TV to AUDIO and S VIDEO OUT
on the DVD Player
Connecting a DVD Player with
component video output
connectors (Lower illustration)
1 Using an AUDIO cable, connect AUDIO of LINE OUT on the DVD Player to AUDIO of VIDEO 4 IN on the projection TV (WNte- AUDIO Left,
2 Using three yellow VIDEO cables, connect
Y, Pl_, and PR of COMPONENT VIDEO
OUT on the DVD Player to Y, PE_.and PR of VIDEO 4 IN on the projection TV.
Notes:
•Since fhe high quality pictures on a DVD disc contain a lot of information, picture
noise may appear. In [hks case, adjust "Noise
Reduction" | ill the Video menu. | (see "Noise |
Reduction" | on page 26) |
|
•Some DVD Player termh'mls may be labeled differently. If so, connect as follows: Connect Y (green) to Y,
Connect Pn (b_ue) to C,, Cb or B Y, Connect Pl_ (red} to C_, Cr or R Y.
•This prNectlon TV does not support progressive scan DVD players output, Please use the interlaced output,
Disconnect aft power sources before making any connections.
DV[$
_VDPlayer
directly to the projection TV,
Conrle_ing the DVD Player through other video equipment will tause unwanted picture noi_e.