Sony KP-61V90, KP-53VGB manual Connecting a DTV digital television receiver, Connecting Camcorder

! I s aIIir g arid Connect€rig Projec ior TV (con ¢nu÷d)

Connecting a DTV (digital television) receiver

Before connecting, be sure to read the Operating Instructions of the DTV receiver.

1 Attach the coaxial cable from the roof

antenna to VHFiUHF IN (DTV) on the DTV receiver.

Disconnect all power sources before making any connections.

7

YO-ISVN_V{not _app/_} / 2

2Using AUDIO and S VIDEO cables, connect AUDIO and S VIDEO OUT on the DTV receiver to AUDIO and S VIDEO IN on the

,_tlon TV (White-AUDIO Left, Red-

ORight).

Notes:

•Your DTV receive;" must be able to support 480i video format output.

•If your DTV receiver supports 480i signal

fr6m YPI_PI_,you can connect Y, PE_ani:l P_ of VIDEO OUT o,1 the DTV receiver to Y, PE_

and Pla of VIDEO 4 IN o,1 the projection TV using VIDEO cables.

Connecting		a camcorder
Use	this connection to view a picture directly		YQ=151=11101{_t _pIldi_a}
from	your camcorder.

1 Using AUDIO and S VIDEO* cables, connect AUINO and S VIDEO OUT on the camcorder

to AUDIO and S VIDEO IN inside the drop- down panel on the front of the proIection TV

(White-AUDIO Left, Red-AUDIO Right**).

2 Press VIDEO 2 to select the video inputs from a camcorder.

*if your camcorder ts not equipped with S VIDEO,

use a VIDEO cable (yellow) instead of the S VIDEO cable.

**if you are connecting a mor/allraI camcorder, connect only the single audio output to the left: (MONO) input on the projection TV.