Sony KP-53VGB, KP-61V90 manual Rv,VIDEO 1, Video 2, Video 3 and Video, Jump, Freeze, Display, Sap

TVNIDEO	Pressrepeatedlytoscrollthroughavailablevideoinputs:
	"rv,VIDEO 1, VIDEO 2, VIDEO 3 and VIDEO 4.
	If you select "Skip" as a "Video Label" in the Set Up menu. your projection
	TV will skip the video input you selected. (see "Video Label" on page 35)
JUMP	Press to alternate or jump back and forth between two channels, The
	projection TV will jump between the current channel and the last channel
	selected using the 0-9 buttons,
FREEZE	This is useful when you need to copy down information that appears on the
	TV'sscreen,
	Press to freeze the desired picture, The frozen picture is displayed in the
	window picture while viewing the normal picture of the current channel in the
	main picture.
	6

To change the location of the window picture, press _-, {,, _. or,_.

Press FREEZE again to display the normal picture,

DISPLAY	Press to display	the	channel	number, current	time,	channel caption (if set),
	and MTS/SAP	mode	(if SAP	is selected), The	SAP	indication disappears and

the other indications dim three seconds later. To turn the display off. press DISPLAY again.

(continued)

REFER TO THE

_ii..._ "_ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF

THIS MANUAL AS YOU REVIEW THIS CHART

21