Setting Up the Channel List
Using Auto Program
After you finish connecting the TV, you need to run the Auto Program feature, which automatically creates a list of available channels. The Auto Program screens appear when you turn on your TV for the first time after hooking it up.
To run Auto Program the first time you turn on your TV
1Press POWER to turn on the TV. The Initial Setup screen appears.
2When prompted to start Auto Program, press the CH+ button to start Auto Program.
To run Auto Program again at a later time
❑Use the Auto Program feature as described on page 67.
To reset the TV to factory settings
1Press POWER to turn on the TV.
2Hold down RESET on the remote control.
3Press TV POWER on the TV. (The TV will turn itself off, then back on.)
4Release RESET.
Setup
SETUP
SETUP
SETUP
SETUP
39