Sony KP-46WT520, KP-57WS520, KP-51WS520 manual Adjusting the Convergence Manually

Adjusting the Convergence Manually

zFor details on using the Setup Menu, see page 72.

The Convergence feature gives you more control over the picture’s convergence than the Flash Focus feature, allowing you to fine-tune the convergence.

✍Before adjusting the convergence manually for the first time, you must first perform Flash Focus (as described on page 40).

1Press MENU to display the Menu.

2Press B or b to highlight the Setup icon and press .

3Highlight Convergence and press .

A pattern of white crosses appears, with a yellow around one of the crosses. Aligned crosses (which do not need adjustment) look white and have little or no red or blue showing. Crosses that are not aligned show red or blue shades beyond their edges.

Setup

SETUP

- -- -

Full/Normal
<	<	Select:	End: Menu
Move <<

SETUP

You can scroll up and down through the 9 x 7 field of crosses to manually converge all portions of the screen.

4Move the to surround a cross that you want to adjust. Press . The changes to red.

5If the cross that you selected has red edges, move until the red image is replaced with a white cross. Once you have finished this

(or the cross does not have red edges), press . The changes to blue.

6If the cross you selected has blue edges, move until the blue image is replaced with a white cross. Once you have finished this,

press . The changes to yellow again.

7Repeat steps 4 to 6 to adjust other crosses. When finished, press MENU to exit the Setup Menu.

SETUP

SETUP

41