Setup
SETUP
Satellite Receiver
and VCR
Using
S VIDEO jacks?
See page 23.
To connect a satellite receiver and VCR
1Connect the CATV cable to the single (input) jack of the splitter.
2Use a coaxial cable to connect one of the splitter’s two output jacks to the TV’s VHF/UHF jack.
3Use a coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.
4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
5Use a coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.
6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.
7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.
8Run Auto Program, as described in “Setting Up the Channel List” on page 39.
Notes on Using This Connection
To Do This ... | Do This ... |
Watch the satellite receiver | Press TV/VIDEO repeatedly to select the satellite receiver input (VIDEO 3 in |
| the illustration). |
|
|
Watch the VCR | Press TV/VIDEO repeatedly to select VCR input (VIDEO 1 in the illustration). |
|
|
Set up the TV remote control | If you have a |
to operate the satellite | remote control. See “Programming the Remote Control” on pages |
receiver or VCR |
|
|
|
Activate the TV remote | For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, press |
control to operate the satellite | DVD/VCR FUNCTION. |
receiver or VCR |
|
|
|
Control satellite receiver and | See “Operating a Satellite Receiver” on page 48 and “Operating a VCR” on |
VCR functions with the TV | page 48. |
remote control |
|
|
|
Label video inputs to easily | See the instructions for setting up Video Labels on pages |
identify equipment connected |
|
to the TV |
|
|
|
30