Sony KP-46WT520, KP-57WS520, KP-51WS520 manual Cable Box Only, To use a cable box

Setup

SETUP

Cable Box Only	For best results, use this connection if:
	❑	Your cable company scrambles all channels, which requires you
		to use a cable box.
	❑	You do not have a VCR. (If you have a VCR, see pages 24 and 26.)

With this connection you can:

❑Use the TV remote control to change channels coming through the cable box to the TV’s VHF/UHF jack. (You must first program the remote control for your specific cable box.)

About Using This Connection with Dual Picture (Twin View, etc.) Features

With this connection, all channels come into the TV through your cable box and only one unscrambled signal is sent to the TV, so you cannot use the dual picture features. If some of your channels are scrambled, but others are not, consider using the “Cable Box and Cable” connection on page 18 instead.

To connect the cable box

1Connect the CATV cable to the cable box’s input jack.

2Use a coaxial cable to connect the cable box’s output jack to the TV’s VHF/UHF jack.

3Run Auto Program, as described in “Setting Up the Channel List” on page 39.

	CATV	Coaxial cable	VHF/UHF
	cable		TV
	1	2
	IN	OUT
	Cable box
Notes on Using This Connection
To Do This ...	Do This ...
Use the cable box	Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
	and then use the cable box to switch channels.
Set up the TV remote control	Program the remote control. See “Programming the Remote Control” on
to operate the cable box	pages 46-47.
Activate the remote control to	Press SAT/CABLE FUNCTION.
operate the cable box
Prevent the accidental	When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels	box is set to (usually channel 3 or 4). You can use the TV’s Channel Fix
	feature to lock in a specific channel. For details, see “Using the Channel
	Menu” on page 67.

20