Panasonic SC-BTT350, SC-BTT755 operating instructions Preparing cables and making connection,  

Preparing cables and making connection

	Use of the speaker cable stickers is convenient		Connecting the speaker cables. Insert the wire fully,
1		2
	when making cable connections.		taking care not to insert beyond the wire insulation.
	e.g. Front speaker (L)		e.g. Surround speaker [BTT350]

Getting started

FRONT

Lch





ASpeaker cable sticker (supplied)

B Connector

Speaker cable sticker		Colour
1	FRONT (L)	WHITE
2	FRONT (R)	RED
3	SURROUND (L)	BLUE
4	SURROUND (R)	GREY
5	CENTRE	GREEN
6	SUBWOOFER	PURPLE

r: White

s: Blue line

Push!

Be sure to match the number on each sticker with the connector colour.

≥Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.

≥Don’t use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the speaker before connecting the appropriate cable.

≥To avoid injury by falling or dropping the speaker, place the speaker cables with care not to stumble or hook.

≥Do not hold the speaker in one hand to avoid injury by dropping the speaker when carrying.

[BTT755]

∫Preventing the speakers from falling

≥Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have strong enough support. Improper attachment may result in damage to the wall or speakers.

≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.











AString (not supplied)

Thread from the wall to the speaker and tie tightly.

BRear of the speaker

CScrew eye (not supplied) D Wall

E Approx.150 mm

VQT2W23

13