Soundtrack Preference, Subtitle Preference

Soundtrack Preference

Choose the language for audio.

≥If “Original” is selected, the original language of each disc will be selected.

≥Enter a code (> 50) with the number buttons when you select “Other ¢¢¢¢”.

Sound

Dynamic Range Compression

You can listen at low volumes but still hear dialogue clearly. (Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥“Auto” is effective only when playing Dolby TrueHD.

Subtitle Preference

Choose the language for the subtitle.

≥If “Automatic” is selected and the language selected for “Soundtrack Preference” is not available, subtitles of that language will automatically appear if available on that disc.

≥Enter a code (> 50) with the number buttons when you select “Other ¢¢¢¢”.

Menu Preference

Choose the language for the disc menus.

≥Enter a code (> 50) with the number buttons when you select “Other ¢¢¢¢”.

BD-Live Internet Access (> 28)

You can restrict Internet access when BD-Live functions are used.

≥If “Limit” is selected, Internet access is permitted only for BD-Live contents which have content owner certificates.

DivX Subtitle Text

Select a suitable item according to the language used for DivX subtitles text (> 29).

≥This item is displayed only after playing back a file.

Picture

Still Mode

Select the type of picture shown when you pause playback.

Automatic Automatically selects the type of picture shown.

	Field	Select if jittering occurs when “Automatic” is
	Field	selected.
		selected.

	Frame	Select if small text or fine patterns cannot be
	Frame	seen clearly when “Automatic” is selected.
		seen clearly when “Automatic” is selected.

Seamless Play

The chapter segments in playlists are played seamlessly.

≥Select “On” when the picture freezes for a moment at the chapters segment in playlists.

NTSC Contents Output

Select PAL60 or NTSC output when playing NTSC discs.

Digital Audio Output

Press [OK] to show the following settings:

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

MPEG Audio

Select the audio signal to output.

≥Select “PCM” when the connected equipment cannot decode the respective audio format.

≥Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and secondary audio (including the button click sound). (> 28)

≥If “Off” is selected, the unit outputs the primary audio only.

Digital Audio Input

Press [OK] to show the following settings:

PCM-Fix

Select the audio signal to input.

≥“On”: PCM is available.

≥“Off”: PCM and Dolby Digital are available. Select “On” if the sound is cut off intermittently.

Downmix

Select the downmix system to enjoy multi-channel or 2-channel sound.

≥Select “Surround encoded” to enjoy the surround sound.

≥There is no downmix effect on the bitstream audio signal.

≥The audio will be output in “Stereo” in the following cases. jAVCHD playback

jPlayback of secondary audio (including the button click sound).

7.1ch Audio Reformatting

Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch.

≥If “Off” is selected, sound is played over the original number of channels.

(Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

Audio reformatting is enabled in the following cases:

≥When you have selected “PCM” in “Digital Audio Output”.

≥When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM.

High Clarity Sound

When connected to TV via the HDMI AV OUT terminal for outputting image, it produces clearer sound.

≥ Set to “Enable” and then set “High Clarity Sound” on the Playback menu to “On”. (> 37)

Audio Delay

Mis-sync between the video and audio is corrected by delaying the audio output.

VQT2W23

		Speaker
	40
		Refer to page 43