Speaker installation option
Attaching to a wall
You can attach all of the speakers (except subwoofer) to a wall.
[BTT755]: Centre speaker |
|
|
|
|
|
| | |
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw. Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
≥Do not attempt to attach these speakers to walls using methods other than those described in this manual.
1 Drive a screw (not supplied) into the wall.
A At least 30 mm
B ‰ 4.0 mm
[BTT350]: Centre speaker
I18.8 mm J 117 mm
K 209 mm to 211 mm L 97 mm
M 17 mm
N 99 mm to 101 mm
| C ‰ 7.0 mm to 9.4 mm | |
D Wall or pillar | ||
| ||
| E 5.5 mm to 7.5 mm |
∫To avoid speaker dropping
[BTT755]: Front speaker, Centre speaker, Surround speaker e.g., [BTT755] Front speaker
2 Fit the speaker securely onto the screw(s) with the hole(s).
e.g., [BTT755] Front speaker
DO NOT | DO |
≥ In this position, the speaker | ≥ Move the speaker so |
will likely fall if moved to the | that the screw is in this |
left or right. | position. |
[BTT755]: Front speaker, Surround speaker Attach to a wall without the base and the stand.
A String (not supplied)
B Screw eye (not supplied) C Less than 10 cm
D Rear of the speaker
≥Consult a qualified building contractor to avoid damage to the wall or speakers.
≥Use a string of less than ‰ 2.0 mm, which is capable of supporting over 10 kg.
[BTT350]: | | |
Front speaker, Surround speaker | ||
F | 97 mm |
|
G | 210 mm to 212 mm |
|
VQT2W23 H | 26 mm |
|
44