STEP 7: Reprogramming the remote control
When other Panasonic products respond to this remote control
Change “Remote Control” (> 42) on the main unit and the remote control (the two must match) if you place other Panasonic products close together and it responds to this remote control.
To change the code on the main unit.
1 While stopped, press [START].
2 Press [3, 4] to select “To Others” and press [OK].
3 Press [3, 4] to select “Setup” and press [OK].
4 Press [3, 4] to select “General” and press [OK].
5 Press [3, 4] to select “Remote Control” and press [OK].
6 Press [3, 4] to select the code (1 or 2) and press [OK].
To change the code on the remote control.
1 While pressing [OK]
Press and hold the number button (1 or 2), which has the same number you selected in the step 6 for more than 5 seconds.
2 Press [OK].
Inserting or removing media
SD CARD
≥When inserting a media item, ensure that it is facing the right way up.
≥While the reading indicator is displayed, do not turn off the unit or remove the media. Such action may result in loss of the media’s contents.
≥When removing the SD card, press on the centre of the card and pull it straight out.
∫To switch sources
Press [BD/SD] or [EXT-IN] to select “BD/DVD”, “SD” or “USB”.
≥If media is inserted while the unit is stopped, the source switches automatically depending on the inserted media.
VQT2W23
24