Panasonic Firmware Update Guide for Blu-ray Players

Network Easy Setting (Connection Test)

Network Easy Setting (Connection Test)

Complete.
1.	LAN cable connection	: Fail
2.	IP address setting	: Fail
3.	Connection to gateway	: Fail

LAN cable is not connected. Please check the connection.

Select “Yes” and press [OK] to check network connection again.

Select “No” and press [OK] to finish Network

Easy Setting.

		Yes		No
		OK
		Display			Check the
						following
1.	LAN cable connection or			:Fail	≥ Connection of
Connection to access point					the LAN
2.	IP address setting			:Fail	cables (> 19)
3.	Connection to gateway			:Fail
1.	LAN cable connection or			:Pass	≥ Connection
Connection to access point					and settings
2.	IP address setting			:Fail	of the hub
					and router
3.	Connection to gateway			:Fail	≥ Settings of
					“IP Address /
1.	LAN cable connection or
				:Pass	DNS
Connection to access point
					Settings”
				:Home	(> 42)
2.	IP address setting			network
				available
3.	Connection to gateway			:Fail
1.	LAN cable connection or			:Pass
Connection to access point
2.	IP address setting			:Pass
3.	Connection to gateway			:Fail
Network Easy Setting (Internet Connection Test)
	Network Easy Setting (Internet Connection Test)
		Complete.
		- Connection to the Internet		: Fail(B019)
		Failed the connection test.
		Cannot find the server.(B019)
		Please refer to the operating instructions for the cause
		of the error and the countermeasure for it.
		Press [OK].
		OK
	Display			Check the following
Cannot find the server.			≥ “Primary DNS” and “Secondary
(B019)			DNS” settings of “IP Address /
			DNS Settings” (> 42)
			≥ The server may be busy or the
Failed to connect to			service may have been
			suspended. Please wait a few
the server.
			moments, and then try again.
(B020)
			≥ Settings of “Proxy Server
			Settings” (> 42) and the router

≥ Refer to the operating instructions of the hub or router.	started
≥ You can perform this setup anytime by selecting “Network Easy Setting” in
the Setup menu. (> 42)
≥ You can redo these settings individually using “Network Settings”. (> 42)
≥ Do not use this device to connect to any wireless network for which	Getting
networks (SSID) for which you do not have usage rights may be displayed;
you do not have usage rights.
During automatic search in a wireless network environment, wireless
however, using these networks may be regarded as illegal access.
≥ After performing network settings on this unit, the settings (encryption level,
etc.) of the Wireless router (Access point) might change. When you have
trouble getting online on your PC, perform the network settings of your PC
in accordance with the settings of Wireless router (Access point).
≥ Please be aware that connecting to a network without encryption may
result in the content of the communication being illegitimately viewed by a
third party, or the leaking of data such as personal or secret information.

Firmware updating

Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.

This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection. When a new firmware version is available, the following screen is displayed.

The latest firmware is available.

Please update firmware in Setup.

To update the firmware

Press [START] > select “To Others” > [OK] > select “Setup” > [OK] > select “General” > [OK] > select “Firmware Update” > [OK] > select “Update Now”

If downloading on this unit fails or this unit is not connected to the Internet, then you can download the latest firmware from the following website and burn it to a CD-R to update the firmware.

http://panasonic.jp/support/global/cs/ (This site is in English only.)

To show the firmware version on this unit. (> 42, “System Information”)

DO NOT DISCONNECT the unit from the AC power or perform any operation while the update takes place.

After the firmware is installed, “FINISH” will be displayed on the unit’s display. Unit will restart and the following screen will be displayed.

The firmware has been updated.

Current Installed Version:x.xx

OK

RETURN

≥Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment.

≥If you do not want to check for the latest firmware version, set “Automatic Update Check” to “Off”. (> 42)

VQT2W23

23