S E T U P M E N U O P T I O N S
Video Setup
The Video Setup section of the Setup Menu allows you to configure video output options.
1.Picture Adjustment: Adjusts picture control settings. The
2.Dual HDMI Output: Allows you to select the output mode when both HDMI Output ports are in use. If only one single HDMI Output port is active, this selection will not apply.
ξSplit A/V (recommended) – Use HDMI 1 OUT as the dedicated video output port and HDMI 2 OUT as the dedicated audio output port. This setting will ensure the best possible picture quality and the highest possible audio resolution.
ξDual Display – Send digital audio and video signals to both HDMI Outputs simultaneously. This setting is only recommended when two HDMI displays are required, since the surround sound audio signal may be
NOTE
ξThe player can automatically adjust the resolution of digital audio and video signals depending on the capabilities of the connected television and receivers.
ξFor HDMI 1 OUT, the dedicated QDEO video processor will be used unless Source Direct is selected, in which case QDEO is bypassed.
3.3D Output: Allows you to choose the video output mode for 3D content.
ξAuto (default) – Outputs 3D if supported both by both the disc content and the display. The player automatically checks for the existence of 3D content on the disc and the 3D compatibility of the TV or projector. If both criteria are met, the player sends 3D video from its HDMI output terminals; otherwise, only 2D video is sent out. Active shutter 3D glasses (which are not sold by OPPO) are required to enjoy the 3D movie on your TV.
ξOff – Always output 2D video format, even when 3D video exists on the disc. This guarantees the video quality if your TV is not 3D compatible, or if some necessary components (such as the 3D glasses) are missing.
ξForced – Always output 3D video format for 3D
55